-
ARDUINO
- RASPBERRY
- MICRO:BIT
- KITS
-
COMPONENTES
-
Resistências Elétricas
- Kit de Resistências
- Resistências 1% 125mW
- Resistencias 1% 250mW
- Resistencias 1% 500mW
- Resistencias 1% 600mW
- Resistências 1% 1W
- Resistencias 1% 2W
- Resistências 5% 125mW
- Resistencias 5% 250mW
- Resistencias 5% 500mW
- Resistências 5% 1W
- Resistencias 5% 2W
- Resistencias 5% 3W
- Resistências Potência
- Resistências Várias
- Redes Resistencias
- Termistores
- Trimmers
- Trimmers 3296
- Joysticks
- Botões
- Potenciometro slider
- Potenciometros Rotativos
- Potenciometro Multivolta
- Potenciometros Motorizados
- MODULOS
- SENSORES
- ROBÓTICA
- IMPRESSÃO 3D
-
FERRAMENTAS
Ferramenta Eletronica
- Acessórios
- Analisador Logico
- Alicates para Eletronica
- Berbequins
- Caixas Arrumação
- Chaves de Precisão
- Chaves Ajuste
- Extensões
- Fita Isoladora
- Fonte de Alimentação
- kit Ferramentas
- Lupa Eletronica
- Aparelhos de Medida, Multímetros e Outros
- Osciloscopios
- Pinças para Eletrónica
- Pontas de Prova
- Material Soldadura
- Spray de Limpeza
- Tornos e Suportes
- PROMOÇÕES
- CHEQUE PRENDA
Linino ONE
Linino ONE
The Linino ™ ONE is a MIPS board based on the Atheros AR9331 and the ATmega32u4.
Descrição
Linino ONE
The Linino ™ ONE is a MIPS board based on the Atheros AR9331 and the ATmega32u4. The Atheros processor supports Linino, a Linux distribution based on OpenWRT. The board has built-in WiFi support, 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, 2 reset buttons and 1 user button.
The Linino One module is composed by a main board and two add-on modules. The Main board contains the following blocks:
- – Mips microprocessor Qualcomm Atheros AR9331 + Wifi module
- – AVR Atmel AtMega32u4 microcontroller
- – MicroUSB
- – Reset buttons
- – Leds
- – ICSP connector
It is possible to add the module dogRJ45 in order to add the following functionality:
- – Ethernet RJ45 port
Adding the dogUSB add-on module you’ll add the following functionalities
- – USB port
- – SD card
The add-ons are optional and they can be mounted depending on the user needs.