Joystick Shield Kit | Shields Varios
Joystick Shield Kit | Shields Varios
Joystick Shield Kit | Shields Varios
Joystick Shield Kit | Shields Varios
Joystick Shield Kit | Shields Varios
Joystick Shield Kit | Shields Varios
Joystick Shield Kit | Shields Varios
Joystick Shield Kit | Shields Varios
Joystick Shield Kit | Shields Varios
Joystick Shield Kit | Shields Varios

Joystick Shield Kit

Joystick Shield Kit

The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick!

PTR003052
11,75 €
Com IVA

Descrição

Joystick Shield Kit

The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers. Soldering is required, but it’s relatively easy and requires minimal tools. We even have a step by step guide!

The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.

This product is the entire kit and contains the following items:

  • 1x Joystick Shield PCB
  • 4x Momentary Push Button Switch - 12mm Square
  • 1x Thumb Joystick
  • 1x Mini Push Button Switch (breaks out Arduino’s reset switch)
  • 2x 6-pin Arduino Stackable Header
  • 2x 8-pin Arduino Stackable Header

Documents:

Detalhes do produtos

Clientes que compraram este produto também compraram:

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies