LM675T Power Operational Amplifier The LM675 is a monolithic power operational amplifier featuring wide bandwidth and low input offset voltage, making it equally suitable for AC and DC applications.
LM393 - Dual Comparator These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
IR2110PBF - High and Low side Mosfet Driver The IR2110/IR2113 are high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels.
DAC0808 - 8-Bit D/A Converter The DAC0808 is an 8-bit monolithic digital-to-analog converter (DAC) featuring a full scale output current settling time of 150 ns while dissipating only 33 mW with ±5V supplies.
SG3524N - Regulating Pulse-Width Modulator The SG3524 devices incorporate all the functions required in the construction of a regulating power supply, inverter, or switching regulator on a single chip.
MAX756 - 3.3V 5V Adjustable-Output Step-Up DC-DC ConverterThe MAX756/MAX757 are CMOS step-up DC-DC switching regulators for small, low input voltage or battery-powered systems.
TL494 - PWM Control Circuit The TL494 device incorporates all the functions required in the construction of a pulse-width-modulation (PWM) control circuit on a single chip.
MCP3002 - 2-Channel 10-Bit ADC With SPI Interface The MCP3002 has a 10-bit analog to digital converter (ADC) with a simple to use SPI interface.
LM3900 - Quadruple Norton Operational Amplifier These devices consist of four independent, high-gain frequency-compensated Norton operational amplifiers that were designed specifically to operate from a single supply over a wide range of voltages.
TDA7377 - 2x30W Dual/Quad Power Amplifier The TDA7377 is a class AB car radio amplifier able to work either in Dual Bridge or Quad Single Ended configuration.
LM4558 RC4558 - Dual General-Purpose Operational AmplifierThe RC4558 device is a dual general-purpose operational amplifier, with each half electrically similar to the µA741, except that offset null capability is not provided.
MCP6274 - Quad Rail-to-Rail Operational Amplifier This family also operates from a single supply voltage as low as 2.0V, while drawing 170 µA (typical) quiescent current. The MCP6274 supports rail-to-rail input and output swing.