Solar Charger Shield v2.2 | Fonte de Alimentação

Solar Charger Shield v2.2 | Fonte de Alimentação

Solar Charger Shield v2.2 | Fonte de Alimentação

Solar Charger Shield v2.2 | Fonte de Alimentação

Solar Charger Shield v2.2 | Fonte de Alimentação

Solar Charger Shield v2.2 | Fonte de Alimentação

Solar Charger Shield v2.2 | Fonte de Alimentação

Solar Charger Shield v2.2 | Fonte de Alimentação

Solar Charger Shield v2.2

Solar Charger Shield v2.2

The solar charger is a stackable shield to Arduino compatible platforms, enables adaptive battery power and act as energy harvester for in-field charging.

Referência: PTR005858

Últimas unidades em stock

19,43 €

Com IVA

Descrição

Solar Charger Shield v2.2

Description

The solar charger is a stackable shield to Arduino compatible platforms, enables adaptive battery power and act as energy harvester for in-field charging. You may use various batteries that has the voltage of 3.0V-4.2V to shift up for 5V output, or put on Li-ion battery and solar panel to form an autonomous sensor unit. The maximum current provided by the board can get up to 600mA. An usb connector is also useful to charge the battery.

Features:

Output Disconnect
Short circuit protection
3W Output Power when connecting battery
Continuous Charge Current Up to 900mA
Battery status indication ( Vermelho : Charging , Verde: Charged )
Micro-USB Connector

Specification:

Battery input voltage: 3.0~4.5V
USB input voltage: 4.75~5.25V
Solar input voltage: 4.8~6V
Maximum Output Power(with battery): 3W(600mA@5V)
Ripple voltage：<100mV @ 500mA
Dimensions: 68*53mm

Technical Details

Dimensions	115mm x 75mm x 25mm
Weight	G.W 42.5g
Battery	Exclude

Detalhes do produtos

Clientes que compraram este produto também compraram:

MyoWare Muscle Sensor | Biométrica

MyoWare Muscle Sensor | Biométrica 2

Biométrica

MyoWare Muscle Sensor

MyoWare Muscle Sensor Using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks… but what if we could take the buttons, levers and joysticks out of the equation?

Ver

Premium Male/Male Jumper Wires 100mm - Pack of 40 | Jumper Wires

Jumper Wires

Premium Male/Male Jumper Wires 100mm - Pack of 40

Premium Male/Male Jumper Wires 100mm - Pack of 40 Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 100mm long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors).

Arduino Uno R3 | Arduino

Arduino Uno R3 | Arduino 2

Arduino

Arduino Uno R3

Arduino Uno R3 Arduino UNO R3 é uma placa de desenvolvimento baseada no microcontrolador ATmega328.

Sensor de Temperatura LM35 | Sensores de Temperatura

Sensor de Temperatura LM35 | Sensores de Temperatura 2

Sensores de Temperatura

Sensor de Temperatura LM35

Sensor de Temperatura LM35 This temperature sensor LM35 is closed in an metal pin and water resistant.

Polymer Lithium Ion Battery - 3.7v 850mAh | Baterias Lipo

Polymer Lithium Ion Battery - 3.7v 850mAh | Baterias Lipo 2

Baterias Lipo

Polymer Lithium Ion Battery - 3.7v 850mAh

Polymer Lithium Ion Battery - 3.7v 850mAhThese are very slim, extremely light weight batteries based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in production. Each cells outputs a nominal 3.7V at 850mAh!

Gas Sensor Breakout | Sensores de Gases

Gas Sensor Breakout | Sensores de Gases 2

Sensores de Gases

Gas Sensor Breakout

Gas Sensor Breakout This is a simple breakout board for the MQ - 3, MQ - 4, MQ - 6, MQ - 7, and MQ - 8 gas sensors. With the Gas Sensor Breakout you will be able to utilize each oversized, oddly spaced pins featured on every MQ gas sensor product.

RFD22128 - RFduino - CR2032 Coin Battery Shield | RFDuino

RFD22128 - RFduino - CR2032 Coin Battery Shield | RFDuino 2

RFDuino

RFD22128 - RFduino - CR2032 Coin Battery Shield

RFD22128 - RFduino - CR2032 Coin Battery Shield This is the RFduino CR2032 Coin Battery Shield, a small add-on board for the RFduino DIP module that supplies 2-3V to your whole project.

Plastic Water Solenoid Valve - 12V - 1/2 Nominal | Bombas Geradores e Válvulas

Plastic Water Solenoid Valve - 12V - 1/2 Nominal | Bombas Geradores e Válvulas 2

Bombas Geradores e Válvulas

Plastic Water Solenoid Valve - 12V - 1/2 Nominal

Plastic Water Solenoid Valve - 12V - 1/2 Nominal Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening project.

Tower Pro SG92R Servo 9g | Condensadores Poliester

Tower Pro SG92R Servo 9g | Condensadores Poliester 2

Condensadores Poliester

Tower Pro SG92R Servo 9g

Tower Pro SG92R Servo 9g Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller.

Ver

Velleman K/MOWM 10 Color Solid Core Mounting Wire Set | Fio electrico

Fio electrico

Velleman K/MOWM 10 Color Solid Core Mounting Wire Set

Velleman K/MOWM 10 Color Solid Core Mounting Wire Set

Ver

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies