ITeaduino Uno

Iteaduino UNO

Informação do fabricante:

The Iteaduino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

What's the different between Iteaduino UNO and Iteaduino ? It does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U28programmed as a USB-to-serial converter, and use the UNO bootloarder instead of Duemilanove bootloader. When you upload the program of Arduino IDE,  choose the "Arduino UNO" under the "Tools"->"Board" memu , not the "Arduino Duemilanove or Nano w/ ATmega328".

Overview

The Iteaduino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

Feature

• New external IO pin map
• Efficient DC-DC Power supply with wide range input.
• 3.3V/5V Operating Voltage selection
• All pins out for Sensor and Servo
• UART/IIC interface breakout

Hardware

• Microcontroller: ATMega328P
• Max Frequency: 16MHz
• RAM Capacity: 2K
• FLASH Capacity: 32K
• External Resources: No
• Power Supply: 24V, 12V, 9V, 7V, USB: 5V
• I/O Operation Level: 3.3V, 5V
• Board Size: 68.5mm x 58.5mm
• Version: 1.0
• Weight: 75.00g
• Accessories: No

 Download

• Datasheet
• Schematic
• Fritzing Parts