Arduino Nano 33 BLE | Arduino
Arduino Nano 33 BLE | Arduino
Arduino Nano 33 BLE | Arduino
Arduino Nano 33 BLE | Arduino
Arduino Nano 33 BLE | Arduino
Arduino Nano 33 BLE | Arduino
Arduino Nano 33 BLE | Arduino
Arduino Nano 33 BLE | Arduino

Arduino Nano 33 BLE

Arduino Nano 33 BLE

Mais um modelo da marca Arduino: Arduino Nano 33 BLE

PTR007402
Em reposição
34,69 €
Com IVA

Descrição

Arduino Nano 33 BLE

This compact and reliable Nano board is built around the NINA B306 module, based on Nordic nRF 52840 and containing a powerful Cortex M4F. Its architecture, fully compatible with Arduino IDE Online and Offline, has a 9 axis Inertial Measurement Unit (IMU) and a reduced power consumption compared to other same size boards.

This allows the design of wearable devices and movement sensing projects that need to communicate to other devices at a close range. Arduino Nano 33 BLE is also ideal for automation projects thanks to the multiprotocol BT 5.0 radio.

This board is based on the nRF 52840 microcontroller.

Clock: 64MHz

Flash: 1MB

RAM: 256KB

Please note: Arduino Nano 33 BLE only supports 3.3V I/Os and is NOT 5V tolerant so please make sure you are not directly connecting 5V signals to this board or it will be damaged. Also, as opposed to Arduino Nano boards that support 5V operation, the 5V pin does NOT supply voltage but is rather connected, through a jumper, to the USB power input. The Bluetooth is managed by a NINA B306 module. The IMU is a LSM9DS1 and it is managed through I2C. The board has a two 15 pins connectors - one on each side -,  pin to pin compatible with the original Arduino Nano.

Tradução em Português brevemente disponível!

Detalhes do produtos

Clientes que compraram este produto também compraram:

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies