3.6V Micro Hydro Generator

3.6V Micro Hydro Generator

3.6V Micro Hydro Generator

Micro hydro power is clean, renewable energy. Here is a G1/2 micro hydro generator which can supply stably output voltage and output current with the help of one voltage stabilizing circuit and one rechargeable battery.

Referência: PTR001730

Não há produtos suficientes em stock

28,60 €

Com IVA

Descrição

3.6V Micro Hydro Generator

Micro hydro power is clean, renewable energy. Here is a G1/2 micro hydro generator which can supply stably output voltage and output current with the help of one voltage stabilizing circuit and one rechargeable battery. We can install it at home to save household energy, like using spray shower to light LEDs etc.

Specifications

Weight	165 g
Output voltage	3.6V
Battery Capacity	300mA
Maximum working pressure	1.75 MPa
Working pressure	0~1.75MPa
Working temperature	0~110°C
	Maximum 30mins at 110 °C
Recommend flow rate range	1.5~20 l/min
	(Pressure 0.05-0.2mpa)
Installation Method	direction of arrow
Material	nylon/glass fiber,
	Polyformaldehyde

More information

Detalhes do produtos

Clientes que compraram este produto também compraram:

FTDI Basic Breakout - 3.3V

FTDI Basic Breakout - 3.3V 2

Conversores

Modulo conversor USB em Serie, FTDI, 3,3V, Sparkfun DEV-09873

Desenhado a pensar no Arduino mas não só!

Regulador Voltagem Pololu, Step Up (Boost) U3V50F24 Pololu

Regulador Voltagem Pololu, Step Up (Boost) U3V50F24 Pololu 2

Alimentação

Regulador Voltagem Pololu, Step Up (Boost) U3V50F24

Regulador Voltagem Pololu, Step Up (Boost) U3V50F24 Cria 24V a partir de voltagens tão baixas quanto 2,9 volts.

JST XHP 3 Way Header

JST

JST XHP 3 Way Header

JST XHP 3 Way Header

JST RCY Connector Pack Male Pololu

JST RCY Connector Pack Male Pololu 2

Assemblados

JST RCY Connector Pack Male

JST RCY Connector Pack Male This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed.

Liquid Pump - 350GPH (12v)

Liquid Pump - 350GPH (12v) 2

Não há produtos suficientes em stock

Bombas Geradores e Válvulas

Liquid Pump - 350GPH (12v)

Liquid Pump - 350GPH (12v)

Ver

Funduino DHT22 Temperature and humidity sensor Funduino

Funduino DHT22 Temperature and humidity sensor Funduino 2

Não há produtos suficientes em stock

Atmosféricos

Funduino DHT22 Temperature and humidity sensor

Funduino DHT22 Temperature and humidity sensor The DHT22 measures humidity in the range of 0-100% (2-5% accuracy) and the temperature in the range of -40 to 125 ° C (0.5 ° C accuracy).

Ver

G1/2 Water Flow sensor Seeed

G1/2 Water Flow sensor Seeed 2

Não há produtos suficientes em stock

Sensores Variados

G1/2 Water Flow sensor

G1/2 Water Flow sensor Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse Signal.

Ver

Power supply 9V 1A Funduino

Não há produtos suficientes em stock

Fonte de Alimentação

Power supply 9V 1A

Power supply 9V 1A It‘s a good quality switching ‘wall wart’ AC to DC 9V 1000mA wall power supply. These are switch mode power supplies which mean the output is regulated to 9V and the capable output current is much higher (1000mA!).

Ver

Stepper Motor Unipolar-Bipolar 200Steps 7.4V 1A 125oz-in

Stepper Motor Unipolar-Bipolar 200Steps 7.4V 1A 125oz-in 2

Motor Stepper

Stepper Motor Unipolar-Bipolar 200Steps 7.4V 1A 125oz-in

Stepper Motor Unipolar-Bipolar 200Steps 7.4V 1A 125oz-in This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution).

Arduino Motor Shield R3

Arduino Motor Shield R3 2

Não há produtos suficientes em stock

Motor - Pontes H

Arduino Motor Shield R3

Arduino Motor Shield R3 The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently.

Ver

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies