-
ARDUINO
- RASPBERRY
- MICRO:BIT
- KITS
-
COMPONENTES
-
Resistências Elétricas
- Kit de Resistências
- Resistências 1% 125mW
- Resistencias 1% 250mW
- Resistencias 1% 500mW
- Resistencias 1% 600mW
- Resistências 1% 1W
- Resistencias 1% 2W
- Resistências 5% 125mW
- Resistencias 5% 250mW
- Resistencias 5% 500mW
- Resistências 5% 1W
- Resistencias 5% 2W
- Resistencias 5% 3W
- Resistências Potência
- Resistências Várias
- Redes Resistencias
- Termistores
- Trimmers
- Trimmers 3296
- Joysticks
- Botões
- Potenciometro slider
- Potenciometros Rotativos
- Potenciometro Multivolta
- Potenciometros Motorizados
- MODULOS
- SENSORES
- ROBÓTICA
- IMPRESSÃO 3D
-
FERRAMENTAS
Ferramenta Eletronica
- Acessórios
- Analisador Logico
- Alicates para Eletronica
- Berbequins
- Caixas Arrumação
- Chaves de Precisão
- Chaves Ajuste
- Extensões
- Fita Isoladora
- Fonte de Alimentação
- kit Ferramentas
- Lupa Eletronica
- Aparelhos de Medida, Multímetros e Outros
- Osciloscopios
- Pinças para Eletrónica
- Pontas de Prova
- Material Soldadura
- Spray de Limpeza
- Tornos e Suportes
- PROMOÇÕES
- BLOG
JST RCY Plug with 10cm Leads - Male
JST RCY Plug with 10cm Leads - Male
This female JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed.
Descrição
JST RCY Plug with 10cm Leads - Male
This female JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed.
This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed.
This is the female version of the connector (we also offer a matching male version). Two 10 cm 20-AWG wires are crimped inside the connector housing. The leads have silicone insulation and stripped, tinned terminations. As an alternative, we sell a JST connector pack that includes housings and crimp pins you can use to attach these connectors to your own wires.
Note: these connectors are sometimes referred to as “male” in the RC hobby industry, so please look at the product picture carefully to make sure it is what you want.