-
ARDUINO
- RASPBERRY
- MICRO:BIT
- KITS
-
COMPONENTES
-
Resistências Elétricas
- Kit de Resistências
- Resistências 1% 125mW
- Resistencias 1% 250mW
- Resistencias 1% 500mW
- Resistencias 1% 600mW
- Resistências 1% 1W
- Resistencias 1% 2W
- Resistências 5% 125mW
- Resistencias 5% 250mW
- Resistencias 5% 500mW
- Resistências 5% 1W
- Resistencias 5% 2W
- Resistencias 5% 3W
- Resistências Potência
- Resistências Várias
- Redes Resistencias
- Termistores
- Trimmers
- Trimmers 3296
- Joysticks
- Botões
- Potenciometro slider
- Potenciometros Rotativos
- Potenciometro Multivolta
- Potenciometros Motorizados
- MODULOS
- SENSORES
- ROBÓTICA
- IMPRESSÃO 3D
-
FERRAMENTAS
Ferramenta Eletronica
- Acessórios
- Analisador Logico
- Alicates para Eletronica
- Berbequins
- Caixas Arrumação
- Chaves de Precisão
- Chaves Ajuste
- Extensões
- Fita Isoladora
- Fonte de Alimentação
- kit Ferramentas
- Lupa Eletronica
- Aparelhos de Medida, Multímetros e Outros
- Osciloscopios
- Pinças para Eletrónica
- Pontas de Prova
- Material Soldadura
- Spray de Limpeza
- Tornos e Suportes
- PROMOÇÕES
- CHEQUE PRENDA
2 Wheel Self-Balancing Upright Rover Car Arduino Robot Starter Kit
2 Wheel Self-Balancing Upright Rover Car Arduino Robot Starter Kit
The Self-balancing Car Starter Kit is designed for all electronic hobbyists who want to undertake a self-balancing car project.
Descrição
2 Wheel Self-Balancing Upright Rover Car Arduino Robot Starter Kit
Note: Battery and Iteaduino UNO are not included in this starter kit.
The Self-balancing Car Starter Kit is designed for all electronic hobbyists who want to undertake a self-balancing car project. We think people will get a deep impression for their electronic knowledge if they can perform DIY things. So this kit includes all components that you would need. By using the Stablizer shield, you can shorten your project development time. We provide a tutorial and source code that tells you how to use Stablizer shield with arduino, and make this self-balancing car work, but you can also make your own interesting projects by using the parts of the Kit. Please see the following packing list to get some elementary details.
Packing List
- Baseboard *1
- JGA25-26CPR DC Motor with encoder *2
- 25mm Aluminiun Alloy Fixed Bracket *2
- M3 Screw *15
- M3 Nut *15
- Coupling*2
- 6mm+15mm Copper Cylinder *8
- Wheel *2
- Stablizer Shield *1
Motor specification
- Rated Voltage: DC 12v
- Gear ratio: 1/34
- PWM: 26/rpm
- No-load speed: 126rpm/m
- No-load current: 46ma
- Stall current: 1000ma
- Stall torque: 4.2kg.cm
- Rated speed: 100rpm/m
- Rated current: 250ma
- Rated torque: 0.85kg.cm
- Rated power: 1.25w
Self-balancing Car Starter Kit Tutorial