Rover 5 Tank Chassis (2 motors with 2 Encoders) | Chassi de Robo

Rover 5 Tank Chassis (2 motors with 2 Encoders) | Chassi de Robo

Rover 5 Tank Chassis (2 motors with 2 Encoders) | Chassi de Robo

Rover 5 Tank Chassis (2 motors with 2 Encoders) | Chassi de Robo

Rover 5 Tank Chassis (2 motors with 2 Encoders) | Chassi de Robo

Em promoção!

Rover 5 Tank Chassis (2 motors with 2 Encoders) | Chassi de Robo

Rover 5 Tank Chassis (2 motors with 2 Encoders) | Chassi de Robo

Rover 5 Tank Chassis (2 motors with 2 Encoders) | Chassi de Robo

Rover 5 Tank Chassis (2 motors with 2 Encoders) | Chassi de Robo

Rover 5 Tank Chassis (2 motors with 2 Encoders) | Chassi de Robo

Rover 5 Tank Chassis (2 motors with 2 Encoders)

Rover 5 Tank Chassis (2 motors with 2 Encoders)

Rover 5 is a new breed of tracked robot chassis designed specifically for students and hobbyist. Unlike conventional tracked chassis’s the clearance can be adjusted by rotating the gearboxes in 5-degree increments. “Stretchy” rubber treads maintain tension as the clearance is raised.

Referência: PTR000856

Últimas unidades em stock

80,69 €

Com IVA

Descrição

Rover 5 Tank Chassis (2 motors with 2 Encoders)

Rover 5 is a new breed of tracked robot chassis designed specifically for students and hobbyist. Unlike conventional tracked chassis’s the clearance can be adjusted by rotating the gearboxes in 5-degree increments. “Stretchy” rubber treads maintain tension as the clearance is raised.

Inside of the chassis are 4 noise suppression coils at the bottom and a battery holder that accepts 6x AA batteries (not included). It is recommended to use NiMh batteries as they last longer and have a higher current output than Alkaline batteries.

Each gearbox has an 87:1 ratio and includes an optical quadrature encoder that gives 1000 pulses over 3 revolutions of the output shaft. The chassis can be upgraded to include four motors and encoders making it ideal for mecanum wheels.

Specifications

Motor rated voltage: 7.2V
Motor stall current: 2.5A
Output shaft stall torque: 10Kg/cm
Gearbox ratio: 86.8:1
Encoder type: Quadrature
Encoder resolution: 1000 state changes per 3 wheel rotations
Speed: 1Km/hr
Two motors
Two encoders

Documents

Detalhes do produtos

Clientes que compraram este produto também compraram:

Arduino Leonardo s/ Headers | Arduino

Arduino Leonardo s/ Headers | Arduino 2

Arduino

Arduino Leonardo s/ Headers

Arduino Leonardo s/ Headers Arduino Leonardo sem conectores, baseado no ATmega32u4 com 20 entradas/saídas digitais, das quais 7 podem ser usadas como saídas PWM e 12 como entradas analógicas.

Ver

Arduino Motor Shield R3 | Motor - Pontes H

Arduino Motor Shield R3 | Motor - Pontes H 2

Motor - Pontes H

Arduino Motor Shield R3

Arduino Motor Shield R3 The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently.

Ver

PCB Header 40Pin Double-Sided Single Row | Headers e Sockets

Headers e Sockets

PCB Header 40Pin Double-Sided Single Row

PCB Header 40Pin Double-Sided Single Row This connector is a single-row, 40-pin, straight male header strip that can be cut or broken into smaller strips.

Espaçador Hexagonal M3 15mm M/F | Parafusos

-10%

Parafusos

Espaçador Hexagonal M3 15mm M/F

0,38 € 0,42 €

Promoção vai acabar

Espaçador Hexagonal M3 15mm M/F

Hacker LiPoBattery 7.4V 2400mAh | Baterias Lipo

Hacker LiPoBattery 7.4V 2400mAh | Baterias Lipo 2

Baterias Lipo

Hacker LiPoBattery 7.4V 2400mAh

Hacker LiPoBattery 7.4V 2400mAh This high discharge LiPo is a great way to power any R/C, robotic, or portable project. This is an excellent choice for anything that requires a small battery with a lot of punch.

Ver

Li-Ion/Polymer Battery Charger/Balancer - 50W, 5A | Carregador de Baterias

Li-Ion/Polymer Battery Charger/Balancer - 50W, 5A | Carregador de Baterias 2

Carregador de Baterias

Li-Ion/Polymer Battery Charger/Balancer - 50W, 5A

Li-Ion/Polymer Battery Charger/Balancer - 50W, 5A The iMax B6 Balance Charger accurately balances and charges Lithium Polymer, LiFe (A123), NiCd and NiMH batteries. The B6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.

Zumo Reflectance Sensor Array | Sensores Ópticos

Zumo Reflectance Sensor Array | Sensores Ópticos 2

Sensores Ópticos

Zumo Reflectance Sensor Array

Zumo Reflectance Sensor Array This reflectance sensor module is designed for use with the Zumo shield for Arduino. It has six IR LED/phototransistor pairs that can be used for line following or edge detection.

Pixy CMUcam5 Image Sensor | _Obsoletos

Pixy CMUcam5 Image Sensor | _Obsoletos 2

_Obsoletos

Pixy CMUcam5 Image Sensor

Pixy CMUcam5 Image Sensor Do you want to add a pair of eyes to your robot? This image sensor can do it.

Ver

Electronic Brick - Track Sensor | Sensores Ópticos

Electronic Brick - Track Sensor | Sensores Ópticos 2

Sensores Ópticos

Electronic Brick - Track Sensor

Electronic Brick - Track Sensor Electronic brick of track sensor is based on sensor TCRT5000, which is to receive the returned infrared signals after sending out to detect the signal strength. Within a certain height range, the control board can detect whether there are objects.

Jumper Wires M/M Pack of 65 mixed colours | Jumper Wires

Jumper Wires

Jumper Wires M/M Pack of 65 mixed colours

Jumper Wires M/M Pack of 65 mixed colours

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies