CP2102 USB UART Board (micro)
CP2102 USB UART Board (micro)
CP2102 USB UART Board (micro)
CP2102 USB UART Board (micro)
CP2102 USB UART Board (micro)
CP2102 USB UART Board (micro)
CP2102 USB UART Board (micro)
CP2102 USB UART Board (micro)

CP2102 USB UART Board (micro)

CP2102 USB UART Board (micro)

Stock atualizado em tempo real e entregas em 24h-48h.

Compre com confiança!

PTR006920
Stock Reduzido
5,17 €
Com IVA

 

CP2102 USB UART Board (micro)

The CP2102 USB UART Board (micro) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.

CP2102 features:

Single-Chip USB to UART Data Transfer

No external resistors required, no external crystal required

On-chip power-on reset circuit and voltage regulator

Integrated 1024-Byte EEPROM

USB Function Controller

USB Specification 2.0 compliant; full-speed (12 Mbps)

USB suspend states supported via SUSPEND pins

UART

All handshaking and modem interface signals

Data formats supported:

Data bits: 5, 6, 7, and 8

Stop bits: 1, 1.5, and 2

Parity: odd, even, no parity

Baud rates: 300 bps to 1 Mbits

576 Byte receive buffer; 640 byte transmit buffer

Hardware or X-On/X-Off handshaking supported

Event character support

Virtual COM Port Device Drivers

Windows 8/7/Vista/Server 2003/XP/2000

MAC OS-X/OS-9

Linux 2.40 or higher

USBXpress Direct Driver Support

Windows 7/Vista/Server 2003/XP/2000

Windows CE

Temperature Range

–40 to +85 °C

Features

Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/...

Voltage output support: 5V or 3.3V

Integrated USB protection device: SP0503

3 LEDs: TXD LED, RXD LED, POWER LED

Pins accessible on pinheaders: TXD, RXD, RTS, CTS

Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided)

How to Use

In the case of working with a MCU:

VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)

GND: connects to GND

TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)

RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)

RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)

CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)

Note: VCP examples and USBXpress driver program library are provided.

Development Resources

Wiki : www.waveshare.com/wiki/CP2102_USB_UART_Board_(micro)

Tradução em Português brevemente disponível!

Clientes que compraram este produto também compraram:

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies