30:1 Metal Gearmotor 37Dx52L mm | Motor DC com Engrenagens
30:1 Metal Gearmotor 37Dx52L mm | Motor DC com Engrenagens
30:1 Metal Gearmotor 37Dx52L mm | Motor DC com Engrenagens
30:1 Metal Gearmotor 37Dx52L mm | Motor DC com Engrenagens
30:1 Metal Gearmotor 37Dx52L mm | Motor DC com Engrenagens
30:1 Metal Gearmotor 37Dx52L mm | Motor DC com Engrenagens
30:1 Metal Gearmotor 37Dx52L mm | Motor DC com Engrenagens
30:1 Metal Gearmotor 37Dx52L mm | Motor DC com Engrenagens
30:1 Metal Gearmotor 37Dx52L mm | Motor DC com Engrenagens
30:1 Metal Gearmotor 37Dx52L mm | Motor DC com Engrenagens
30:1 Metal Gearmotor 37Dx52L mm | Motor DC com Engrenagens
30:1 Metal Gearmotor 37Dx52L mm | Motor DC com Engrenagens

30:1 Metal Gearmotor 37Dx52L mm

30:1 Metal Gearmotor 37Dx52L mm

This gearmotor is a powerful brushed DC motor with 30:1 metal gearbox intended for operation at 12 V. These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft.

PTR004655
Últimas unidades em stock
28,29 €
Com IVA

Descrição

30:1 Metal Gearmotor 37Dx52L mm

These motors are intended for use at 12 V, though in general, these kinds of motors can run at voltages above and below the nominal voltage (they can begin rotating at voltages as low as 1 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor.

Gearmotor accessories

The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart. We carry two brackets for these gearmotors: a stamped aluminum L-bracket (sold in pairs) and a sturdier, tombstone-style machined aluminum bracket (sold individually):

Gearmotor with bracket and hub.

Pololu machined aluminum bracket for 37D mm metal gearmotors mounting a motor to a clear piece of acrylic.

The 6 mm diameter gearbox output shaft works with the Pololu universal aluminum mounting hub for 6mm shafts, which can be used to mount our larger Pololu wheels (80mm- and 90mm-diameter) or custom wheels and mechanisms to the gearmotor’s output shaft as shown in the left picture below. Alternatively, you could use our 6mm scooter wheel adapter to mount many common scooter, skateboard, and inline skate wheels to the gearmotor’s output shaft as shown in the right picture below:

Black Pololu 90×10mm wheel on a Pololu 37D mm metal gearmotor.

A 37D mm gearmotor connected to a scooter wheel by the 6 mm scooter wheel adapter.

For a general-purpose hex adapter, consider our 12mm hex wheel adapter (also available in an extended version), which lets you use these motors with many common hobby RC wheels, including Dagu Wild Thumper Wheels:

12mm Hex Wheel Adapter for 6mm Shaft connecting a Wild Thumper Wheel to a 37D mm Metal Gearmotor.

Detalhes do produtos

Clientes que compraram este produto também compraram:

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies