Módulo GPS com Antena SAM-M8Q (Qwiic) - Sparkfun
Módulo GPS com Antena SAM-M8Q (Qwiic) - Sparkfun
Módulo GPS com Antena SAM-M8Q (Qwiic) - Sparkfun
Módulo GPS com Antena SAM-M8Q (Qwiic) - Sparkfun
Módulo GPS com Antena SAM-M8Q (Qwiic) - Sparkfun
Módulo GPS com Antena SAM-M8Q (Qwiic) - Sparkfun
Módulo GPS com Antena SAM-M8Q (Qwiic) - Sparkfun
Módulo GPS com Antena SAM-M8Q (Qwiic) - Sparkfun

Módulo GPS com Antena SAM-M8Q (Qwiic) - Sparkfun

Módulo GPS com Antena SAM-M8Q (Qwiic) - Sparkfun

Módulo GPS com Antena SAM-M8Q (Qwiic) - Sparkfun

PTR007612
Últimas unidades em stock
55,10 €
Com IVA

Descrição

Módulo GPS com Antena SAM-M8Q (Qwiic) - Sparkfun

Informação do fabricante:

The SparkFun SAM-M8Q GPS Breakout is a high quality, GPS board with equally impressive configuration options. The SAM-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, and Galileo constellations. This increases precision and decreases lock time and thanks to the onboard rechargable battery, you'll have backup power enabling the GPS to get a hot lock within seconds! Additionally, this u-blox receiver supports I2C (u-blox calls this Display Data Channel) which made it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.

U-blox based GPS products are configurable using the popular, but dense, windows program called u-center. Plenty of different functions can be configured on the SAM-M8Q: baud rates, update rates, geofencing, spoofing detection, external interrupts, SBAS/D-GPS, etc. All of this can be done within the SparkFun Arduino Library!

The SparkFun SAM-M8Q GPS Breakout is also equipped with an on-board rechargeable battery that provides power to the RTC on the SAM-M8Q. This reduces the time-to-first fix from a cold start (~30s) to a hot start (~1s). The battery will maintain RTC and GNSS orbit data without being connected to power for plenty of time.

The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.

The SAM-M8Q GPS Breakout can also be automatically detected, scanned, configured, and logged using the OpenLog Artemis datalogger system. No programming, soldering, or setup required!

GET STARTED

Features:

  • 72-Channel GNSS Receiver
  • 2.5m Horizontal Accuracy
  • 18Hz Max Update Rate
  • Time-To-First-Fix:

           Cold: 26s

            Hot: 1s

  • Max Altitude: 50,000m
  • Max G: ≤4
  • Max Velocity: 500m/s
  • Velocity Accuracy: 0.05m/s
  • Heading Accuracy: 0.3 degrees
  • Time Pulse Accuracy: 30ns
  • 3.3V VCC and I/O

             Current Consumption: ~29mA Tracking GPS+GLONASS

  • Software Configurable

            Geofencing

            Odometer

            Spoofing Detection

            External Interrupt

            Pin Control

            Low Power Mode

            Many others!

  • Supports NMEA, UBX, and RTCM protocols over UART or I2C interfaces

Documents:

Schematic

Datasheet (SAM-M8Q)

Integration Manual (SAM-M8Q)

For more detailed information please check this page.

Clientes que compraram este produto também compraram:

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies