-
ARDUINO
- RASPBERRY
- MICRO:BIT
- KITS
-
COMPONENTES
-
Resistências Elétricas
- Kit de Resistências
- Resistências 1% 125mW
- Resistencias 1% 250mW
- Resistencias 1% 500mW
- Resistencias 1% 600mW
- Resistências 1% 1W
- Resistencias 1% 2W
- Resistências 5% 125mW
- Resistencias 5% 250mW
- Resistencias 5% 500mW
- Resistências 5% 1W
- Resistencias 5% 2W
- Resistencias 5% 3W
- Resistências Potência
- Resistências Várias
- Redes Resistencias
- Termistores
- Trimmers
- Trimmers 3296
- Joysticks
- Botões
- Potenciometro slider
- Potenciometros Rotativos
- Potenciometro Multivolta
- Potenciometros Motorizados
- MODULOS
- SENSORES
- ROBÓTICA
- IMPRESSÃO 3D
-
FERRAMENTAS
Ferramenta Eletronica
- Acessórios
- Analisador Logico
- Alicates para Eletronica
- Berbequins
- Caixas Arrumação
- Chaves de Precisão
- Chaves Ajuste
- Extensões
- Fita Isoladora
- Fonte de Alimentação
- kit Ferramentas
- Lupa Eletronica
- Aparelhos de Medida, Multímetros e Outros
- Osciloscopios
- Pinças para Eletrónica
- Pontas de Prova
- Material Soldadura
- Spray de Limpeza
- Tornos e Suportes
- PROMOÇÕES
- CHEQUE PRENDA
SIM800 GSM/GPRS Board for Raspberry Pi
SIM800 GSM/GPRS Board for Raspberry Pi
Módulo SIM800 GSM/GPRS para Raspberry Pi
Descrição
SIM800 GSM/GPRS Board for Raspberry Pi
Connect your Pi to the world's mobile networks! The Raspberry Pi GSM Board (SIM800) from ModMyPi is a SIM800 quad-band GSM/GPRS/BT module for use on the Raspberry Pi. The board is fully plug and play, and designed to interact with the Raspberry Pi via UART (Serial) for access to GSM/GPRS mobile networks. Please Note. You do require an active SIM card to access mobile networks (not included)!
The SIM800 IC is fully compatible with AT commands sent via the Pi's UART port, enabling functions such as sending and answering calls, sending and receiving text messages and accessing the internet. The board features speaker & microphone jacks, so it's fully possible to turn your Raspberry Pi into a mobile telephone communication device!
The board is powered directly from the Pi's GPIO, and has hardware controlled on/off/reset button which can also be accessed (through use of a jumper cable) via the Pi's GPIO for software controlled powering & resetting.
The package includes a fixed antenna and mounting hardware!
Features
Plug and Play GSM/GPRS/BT Board for the Raspberry Pi
Based on the SIM800 IC
Includes Bluetooth 3.0 Functionality & On-board Bluetooth Antenna
Hardware Power On/Off & Reset Buttons
Software Controllable Power On/Off & Reset via the Pi's GPIO (Requires Jumper Wires)
Quad-Band 850/900/1800/1900MHz
Speaker Output via 3.5mm Jack
Microphone Input via 3.5mm Jack
Micro USB for SIM800 Firmware Updates
Powered Directly From the Pi's GPIO
Dimensions?85mm x 56mm x 25mm
Antenna Dimensions: 90mm x 10mm Fixed
SIM Card Input Size: Standard 15mm x 25mm
Interface?UART
Baud Rate?9600
Note - This product is not compatible with the Raspberry Pi 4 (unless using a GPIO extension)
Tradução em Português brevemente disponível!