Kit de Iniciação SparkFun

Kit de Iniciação SparkFun

Informação do fabricante:

The SparkFun Beginner Parts Kit is a small container of parts frequently used by beginning (or even experienced) hobbyists that gives you all of the basic through-hole components you will need to get started playing with embedded projects. These are the "bubble gum" parts that we regularly use or have often seen requested in classes. Inside this kit you will find a good starter assortment of caps, ICs, regulators, diodes and good-for-blinky LEDs. This kit also features our Adjustable Parts Box for better organization.

This assortment of parts makes a great gift for beginner and advanced electronics nerds! Whether you're starting an electronics collection, or just refilling, the Beginner Parts Kit will have a lot of what you need.

You may notice there are no resistors in this kit. We recommend purchasing the resistor kit listed below for all the resistor values you may need.

GET STARTED!

Includes:

1x Adjustable Parts Box

10x 0.1uF Cap

5x 100uF Cap

5x 10uF Cap

5x 1uF Cap

5x 10nF Cap

5x 1nF Cap

5x 100pF Cap

5x 10pF Cap

5x 1N4148 Diode

5x 1N4001 Diode

5x 2N3906 PNP Transistor

5x 2N3904 NPN Transistor

3x 20-pin Female Header

3x 20-pin Male Header

3x Mini Power Switch

2x Push Buttons

1x 10K Trimpot

2x AS358P OpAmp

2x 3.3V Regulator

2x 5V Regulator

1x 555 Timer

1x Green LED

1x Yellow LED

1x Red LED

1x 7-Segment Red LED

1x Mini Photocell