-
ARDUINO
- RASPBERRY
- MICRO:BIT
- KITS
-
COMPONENTES
-
Resistências Elétricas
- Kit de Resistências
- Resistências 1% 125mW
- Resistencias 1% 250mW
- Resistencias 1% 500mW
- Resistencias 1% 600mW
- Resistências 1% 1W
- Resistencias 1% 2W
- Resistências 5% 125mW
- Resistencias 5% 250mW
- Resistencias 5% 500mW
- Resistências 5% 1W
- Resistencias 5% 2W
- Resistencias 5% 3W
- Resistências Potência
- Resistências Várias
- Redes Resistencias
- Termistores
- Trimmers
- Trimmers 3296
- Joysticks
- Botões
- Potenciometro slider
- Potenciometros Rotativos
- Potenciometro Multivolta
- Potenciometros Motorizados
- MODULOS
- SENSORES
- ROBÓTICA
- IMPRESSÃO 3D
-
FERRAMENTAS
Ferramenta Eletronica
- Acessórios
- Analisador Logico
- Alicates para Eletronica
- Berbequins
- Caixas Arrumação
- Chaves de Precisão
- Chaves Ajuste
- Extensões
- Fita Isoladora
- Fonte de Alimentação
- kit Ferramentas
- Lupa Eletronica
- Aparelhos de Medida, Multímetros e Outros
- Osciloscopios
- Pinças para Eletrónica
- Pontas de Prova
- Material Soldadura
- Spray de Limpeza
- Tornos e Suportes
- PROMOÇÕES
- CHEQUE PRENDA
Micro B USB Cable with LCD Voltage / Current Display
Micro B USB Cable with LCD Voltage / Current Display
Stock atualizado em tempo real e entregas em 24h-48h.
Compre com confiança!
Descrição
Micro B USB Cable with LCD Voltage / Current Display
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting any development board, microcontroller, mobile phone, or other device to your computer or charger.
"Standard?" you might say... nothing gets past the astute eye of an Adafruit customer! Why yes, that is an LCD display embedded in the cable!
This is basically like a USB cable mixed with a Charger Doctor. Plug it into a USB port and it will let you know the voltage on the USB power pins. Once a device is plugged in, it will display the current draw in milliamps. You can use it for up to 2A of current.
You can use this to monitor your project or as a current meter. We thought they could be neat to use for monitoring current when powering your Raspberry Pi and other micro B USB devices. The only down side is that once the device starts charging, the display will not show the voltage anymore, just the current draw.
Technical Details:
Cable length end-to-end: 41.5" / 1,054mm
USB input: 5V
Current max: 2.5A
Tradução em Portguês brevemente disponível!