PiTFT Mini Kit - 320x240 2.8 TFT+Touchscreen for Raspberry Pi | LCD Raspberry Pi
PiTFT Mini Kit - 320x240 2.8 TFT+Touchscreen for Raspberry Pi | LCD Raspberry Pi
PiTFT Mini Kit - 320x240 2.8 TFT+Touchscreen for Raspberry Pi | LCD Raspberry Pi
PiTFT Mini Kit - 320x240 2.8 TFT+Touchscreen for Raspberry Pi | LCD Raspberry Pi
PiTFT Mini Kit - 320x240 2.8 TFT+Touchscreen for Raspberry Pi | LCD Raspberry Pi
PiTFT Mini Kit - 320x240 2.8 TFT+Touchscreen for Raspberry Pi | LCD Raspberry Pi
PiTFT Mini Kit - 320x240 2.8 TFT+Touchscreen for Raspberry Pi | LCD Raspberry Pi
PiTFT Mini Kit - 320x240 2.8 TFT+Touchscreen for Raspberry Pi | LCD Raspberry Pi
PiTFT Mini Kit - 320x240 2.8 TFT+Touchscreen for Raspberry Pi | LCD Raspberry Pi
PiTFT Mini Kit - 320x240 2.8 TFT+Touchscreen for Raspberry Pi | LCD Raspberry Pi
PiTFT Mini Kit - 320x240 2.8 TFT+Touchscreen for Raspberry Pi | LCD Raspberry Pi
PiTFT Mini Kit - 320x240 2.8 TFT+Touchscreen for Raspberry Pi | LCD Raspberry Pi

PiTFT Mini Kit - 320x240 2.8" TFT+Touchscreen for Raspberry Pi

PiTFT Mini Kit - 320x240 2.8" TFT+Touchscreen for Raspberry Pi

Is this not the cutest little display for the Raspberry Pi?

PTR002495
Em reposição
47,48 €
Com IVA

Descrição

PiTFT Mini Kit - 320x240 2.8" TFT+Touchscreen for Raspberry Pi

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top! 

Uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there's 4 spots for optional slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface.For example, you can use one as a power on/off button. See below for the link to get the optional tact switches, they're not included. 

This version comes as a mini-kit, with a 2x13 extra-tall female header (to connect the plate to the Pi) and a 2x13 male header that can be used to connect an IDC cable or cobbler from the side. The photos above also show the optional installed slim tactile buttons. The tactile buttons are not included. Some basic soldering is required to install the headers. You can also pick up an extra-long Pi stacking header if you want to install that instead of the 2x13 female header installed. 

We've created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Our tutorial shows you how to install the software, as well as calibrate the touchscreen, show videos, display images such as from your PiCam and more! 

Technical Details

  • Display current draw is mostly based on the backlight, with full-on backlight the current draw is ~100mA.

Detalhes do produtos

Clientes que compraram este produto também compraram:

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies