3.5inch LCD 320×480 IPS for Raspberry Pi
Features
- 480x320 hardware resolution
- Resistive touch control
- Supports any revision of Raspberry Pi (directly-pluggable)
- Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie)
- Supports FBCP software driver as well, allows to config software resolution and set up dual-display
- IPS technology, high quality and perfect displaying from very wide viewing angle
- Size perfectly fits the Pi (Raspberry Pi B+/2B/3B/3B+)
- High quality immersion gold surface plating
- Combined with the Raspberry Pi, allows you to:
- Take photos by touching (up to 17 camera modes)
- Use software keyboard (system interaction without keyboard/mouse)
Key Parameters
LCD Type |
IPS |
LCD Interface |
SPI |
Touch Screen Type |
Resistive |
Touch Screen Controller |
XPT2046 |
Colors |
65536 |
Backlight |
LED |
Resolution |
320*480 (Pixel) |
Aspect Ratio |
8:5 |
Power Consumption |
TBD |
Backlight Current |
TBD |
Operating Temp. (℃) |
TBD |
Interface
PIN NO. | SYMBOL | DESCRIPTION |
1, 17 |
3.3V |
Power positive (3.3V power input) |
2, 4 |
5V |
Power positive (5V power input) |
3, 5, 7, 8, 10, 12, 13, 15, 16 |
NC |
NC |
6, 9, 14, 20, 25 |
GND |
Ground |
11 |
TP_IRQ |
Touch Panel interrupt, low level while the Touch Panel detects touching |
18 |
LCD_RS |
Instruction/Data Register selection |
19 |
LCD_SI / TP_SI |
SPI data input of LCD/Touch Panel |
21 |
TP_SO |
SPI data output of Touch Panel |
22 |
RST |
Reset |
23 |
LCD_SCK / TP_SCK |
SPI clock of LCD/Touch Panel |
24 |
LCD_CS |
LCD chip selection, low active |
26 |
TP_CS |
Touch Panel chip selection, low active |
External Dimension

Development Resources
Wiki : www.waveshare.com/wiki/3.5inch_RPi_LCD_(B)