-
ARDUINO
- RASPBERRY
- MICRO:BIT
- KITS
-
COMPONENTES
-
Resistências Elétricas
- Kit de Resistências
- Resistências 1% 125mW
- Resistencias 1% 250mW
- Resistencias 1% 500mW
- Resistencias 1% 600mW
- Resistências 1% 1W
- Resistencias 1% 2W
- Resistências 5% 125mW
- Resistencias 5% 250mW
- Resistencias 5% 500mW
- Resistências 5% 1W
- Resistencias 5% 2W
- Resistencias 5% 3W
- Resistências Potência
- Resistências Várias
- Redes Resistencias
- Termistores
- Trimmers
- Trimmers 3296
- Joysticks
- Botões
- Potenciometro slider
- Potenciometros Rotativos
- Potenciometro Multivolta
- Potenciometros Motorizados
- MODULOS
- SENSORES
- ROBÓTICA
- IMPRESSÃO 3D
-
FERRAMENTAS
Ferramenta Eletronica
- Acessórios
- Analisador Logico
- Alicates para Eletronica
- Berbequins
- Caixas Arrumação
- Chaves de Precisão
- Chaves Ajuste
- Extensões
- Fita Isoladora
- Fonte de Alimentação
- kit Ferramentas
- Lupa Eletronica
- Aparelhos de Medida, Multímetros e Outros
- Osciloscopios
- Pinças para Eletrónica
- Pontas de Prova
- Material Soldadura
- Spray de Limpeza
- Tornos e Suportes
- PROMOÇÕES
- BLOG
Português PT
EUR €
Módulo LED Barra Horizontal RGB 5050 WS2812 - 8 LED
Módulo LED Barra Horizontal RGB 5050 WS2812 - 8 LED
Módulo LED Barra Horizontal RGB 5050 WS2812 - 8 LED
Descrição
Módulo LED Barra Horizontal RGB 5050 WS2812 - 8 LED
Informação do fabricante:
A strip consisting of 8 individually addressed RGB 8080 LEDs with integrated controller. One microcontroller pin is sufficient to operate the module. The strip is 53 mm long. The module has soldered-in male pins.
The used communication protocol allows for serial connection of the diodes. Another chain should be connected to the output connector, connecting 4-7VDC, GND and DOUT with DIN respectively. The manufacturer notes that when using more than 500 diodes, the ArduinoUnoRAM memory may not be sufficient.
Connecting the module:
The device has four leads:
- GND- module weight
- 4-7VDC- supply voltage, 20 mA of current per diode
- DIN- digital control signal from a microcontroller
- DOUT- output for connecting the next ring
RGB LED strip specification:
- Supply voltage: 4 V to 7 V
- Current consumption: approx. 20 mA for one diode
- LEDs used: RGB LED WS2812
- Number of diodes: 8
- Soldering male connectors
- Size of the slat: 53 x 10 mm