Flux Bottle | Material Soldadura |

Flux Bottle

Referência PTR001330

Stock Reduzido

2,58 €

Com IVA

Flux Bottle

Descrição

Flux Bottle

Dispenses flux evenly with a fine tipped needle.

Note: No flux inside, this is only the bottle.

Clientes que compraram este produto também compraram:

DC Barrel Jack Adapter Male | Suporte Pilhas |

DC Barrel Jack Adapter Male | Suporte Pilhas | 2

Suporte Pilhas

DC Barrel Jack Adapter Male

0,86 €

DC Barrel Jack Adapter Male This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.

Chisel Tip 1.6mm for 60W ESD Soldering Station | Material Soldadura |

Chisel Tip 1.6mm for 60W ESD Soldering Station | Material Soldadura | 2

Material Soldadura

Chisel Tip 1.6mm for 60W ESD Soldering Station

6,03 €

Chisel Tip 1.6mm for 60W ESD Soldering Station This is a 1.6mm chisel tip for the the 60W ESD Soldering Station that we carry.

Conical Tip 0.2mm for 60W ESD Soldering Station | Material Soldadura |

Conical Tip 0.2mm for 60W ESD Soldering Station | Material Soldadura | 2

Esgotado

Material Soldadura

Conical Tip 0.2mm for 60W ESD Soldering Station

4,18 €

Conical Tip 0.2mm for 60W ESD Soldering Station

Ver

Manga Termo-Retráctil 1.6mm 1.2m Preta | Manga Termo Retractil |

Manga Termo Retractil

Manga Termo-Retráctil 1.6mm 1.2m Preta

0,25 €

Manga Termo-Retráctil 1.6mm 1.2m Preta

PCB Header 40Pin Single Row Long | Headers e Sockets |

Headers e Sockets

PCB Header 40Pin Single Row Long

0,98 €

PCB Header 40Pin Single Row Long

G1/2 Water Flow sensor | Sensores Variados | Seeed

G1/2 Water Flow sensor | Sensores Variados | Seeed 2

Esgotado

Sensores Variados

G1/2 Water Flow sensor

13,71 €

G1/2 Water Flow sensor Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse Signal.

Ver

Servo Small | Servomotor |

Servomotor

Servo Small

10,82 €

Servo Small Here is a simple, low-cost, high quality servo for all your mechatronic needs. Small servo with a standard 3 pin power, control cable, and mounting hardware. This servo is very similar in size and specifications to the Hitec HS-55. Includes hardware as shown.

Inventor's Kit for Arduino - Carrying Case | Caixas Arrumação |

Inventor's Kit for Arduino - Carrying Case | Caixas Arrumação | 2

Esgotado

Caixas Arrumação

Inventor's Kit for Arduino - Carrying Case

9,84 €

Inventor's Kit for Arduino - Carrying Case This is our newest iteration of the SparkFun Inventor's Kit (SIK) Carrying Case.

Ver

Chemtronics CW8100 No Clean Flux Pen | Material Soldadura |

Chemtronics CW8100 No Clean Flux Pen | Material Soldadura | 2

Esgotado

Material Soldadura

Chemtronics CW8100 No Clean Flux Pen

15,99 €

Chemtronics CW8100 No Clean Flux Pen The pen for applying flux with precision control

Ver

Tiny AVR Programmer | ATMEL |

Tiny AVR Programmer | ATMEL | 2

ATMEL

Tiny AVR Programmer

25,58 €

Tiny AVR Programmer The ATtiny45 and 85 are a couple of really cool little MCUs but did you know you can program them in Arduino?

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies