-
ARDUINO
- RASPBERRY
- MICRO:BIT
- KITS
-
COMPONENTES
-
Resistências Elétricas
- Kit de Resistências
- Resistências 1% 125mW
- Resistencias 1% 250mW
- Resistencias 1% 500mW
- Resistencias 1% 600mW
- Resistências 1% 1W
- Resistencias 1% 2W
- Resistências 5% 125mW
- Resistencias 5% 250mW
- Resistencias 5% 500mW
- Resistências 5% 1W
- Resistencias 5% 2W
- Resistencias 5% 3W
- Resistências Potência
- Resistências Várias
- Redes Resistencias
- Termistores
- Trimmers
- Trimmers 3296
- Joysticks
- Botões
- Potenciometro slider
- Potenciometros Rotativos
- Potenciometro Multivolta
- Potenciometros Motorizados
- MODULOS
- SENSORES
- ROBÓTICA
- IMPRESSÃO 3D
-
FERRAMENTAS
Ferramenta Eletronica
- Acessórios
- Analisador Logico
- Alicates para Eletronica
- Berbequins
- Caixas Arrumação
- Chaves de Precisão
- Chaves Ajuste
- Extensões
- Fita Isoladora
- Fonte de Alimentação
- kit Ferramentas
- Lupa Eletronica
- Aparelhos de Medida, Multímetros e Outros
- Osciloscopios
- Pinças para Eletrónica
- Pontas de Prova
- Material Soldadura
- Spray de Limpeza
- Tornos e Suportes
- PROMOÇÕES
- BLOG
Módulo Adaptador Bluetooth para HC-05/HC-06
Módulo Adaptador Bluetooth para HC-05/HC-06
Módulo Adaptador Bluetooth para HC-05/HC-06
Descrição
Módulo Adaptador Bluetooth para HC-05/HC-06
Informação do fabricante:
Each type of bluetooth module can be installed commonly, such as HC05/06/07 / BC04 or other compatible bluetooth module per definition.
With clear key, it can be support pin of the module (e.g., host HC05/06/07)
Set EN can make pin, suspended or high levels, the normal work of the module; Closes as earthing module power (closed current < 20ua) reduce power consumption.
Note: connection BC04 default for hardware settings and from the pattern, if you need to modify for the software settings should be from 3.3V to PIO4 fly line.
Description:
1.Commercial Series: Bluetooth module board Series.
2.With LED indicator light, use 150mA and 3.3V regulation chip.
3.With VCC、GND、TXD、RXD foot for the Bluetooth.
4.With “Re-seach” button(ON/OFF/WAKE foot for it , external MCU outinput “High level” can control module to re-seach).
5.Compatible with bluetooth master module”、slave module”or master-slave(whole) module.
6.Input voltage: 3.3~6V.
7.Size: 1.55cm*3.98cm.