120:1 Mini Plastic Gearmotor HP, 90° 3mm D-Shaft Output
120:1 Mini Plastic Gearmotor HP, 90° 3mm D-Shaft Output
120:1 Mini Plastic Gearmotor HP, 90° 3mm D-Shaft Output
120:1 Mini Plastic Gearmotor HP, 90° 3mm D-Shaft Output
120:1 Mini Plastic Gearmotor HP, 90° 3mm D-Shaft Output
120:1 Mini Plastic Gearmotor HP, 90° 3mm D-Shaft Output

120:1 Mini Plastic Gearmotor HP, 90° 3mm D-Shaft Output

PTR007051
Esgotado
6,27 €
Com IVA

120:1 Mini Plastic Gearmotor HP, 90° 3mm D-Shaft Output

Faça a sua compra hoje até às 12h e receba-a já amanhã!

Compre com confiança!

 

120:1 Mini Plastic Gearmotor HP, 90° 3mm D-Shaft Output

This compact, inexpensive plastic gearmotor (high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range. The gearbox has a 9.7mm-long, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch helps protect the gears from excessive loads.

These brushed DC gearmotors are compact and affordable — perfect for building a quick, miniature robot. They are intended for use at 4.5 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should operate comfortably in the 3 V to 6 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The plastic gearbox is protected by a built-in safety clutch that will typically slip before the gear teeth can shear (typically when the load exceeds around 25 oz-in, or 2 kg-cm).

The mini plastic gearmotor family offers two output shaft orientations relative to the motor shaft (offset and 90°), two motor options (normal and high-power, or HP for short), and two gearbox options (120:1 and 180:1).

Details:

This item has a high-power motor (1250 mA stall current), a 120:1 gearbox, and a 3 mm diameter “D”-shaped output shaft that is perpendicular to the motor shaft. The motor shaft does not extend past the base of the motor. See the dimension diagram (75k pdf) of this gearmotor for more information.

Tradução em Português brevemente disponível!

Clientes que compraram este produto também compraram:

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies