Small Stepper Motor

Small Stepper Motor

These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern.

When using a current limiting driver such as the Easydriver or Big Easydriver, a 12 volt power supply can be used as long as you adjust the current level to 400mA or less. If using a non current limited driver (like a L293D or an H-bridge) you will need to lower your input voltage to keep the motor current below 400mA.

This is a Bipolar motor.

Features:

Stride Angle (degrees) : 7.5

2-Phase

Rated Voltage : 12V

Rated Current : 400mA

3mm Diameter Drive Shaft

4-Wire Cable Attached

In-traction Torque : 100 g/cm

Documents:

Datasheet

Tradução em Português brevemente disponível!