Módulo Sensor de Movimento Mini PIR para Fita LED 12-24Vdc 6A
Módulo Sensor de Movimento Mini PIR para Fita LED 12-24Vdc 6A
Módulo Sensor de Movimento Mini PIR para Fita LED 12-24Vdc 6A
Descrição
Módulo Sensor de Movimento Mini PIR para Fita LED 12-24Vdc 6A
Informação do fabricante:
- Material: Plastic and metal
- Type: Pir Switch
- Easy to install and simple to use
- Adjust the light soft and stable, no flickering
- Mainly use to control LED light lamps and LED Strip
- You can conveniently to let the light auto on/off. The switch can detect human body's infrared , and use infrared to control the load
- Users according to actual needs, the human body sensors installed in the appropriate environment
- Applications: Incandescent lamp, energy-saving lamps, LED lamp, fluorescent lamp and other kinds of loads
Technical Parameters:
- Working temperature: -20 to +60 centigrade
- Input Voltage: 10.5-16V or 21-32V
- Output Voltage: 10.5-16V or 21-32V
- Induction distance: 8M
- Induction angle: 60 degrees
- Output current: <6A
- Delay Time: 1-10min(adjustable)
- Dimensions: 76 * 45 * 32mm
Direction for use:
The human body induction switch is a kind of infrared detection controller ,
adopt infrared detection way to control load switch . Users can according to actual needs ,
installed the human body sensors in the appropriate environment.
Connect the load wire at frist ,following by the power wire :
Please ensure short circuit can not occur between connecting wire before you turn on the power :
when detected somebody,the load light will bright ,when people leave time up to the setting of the delay time ,
the load lights will automatically turn off . controller signal output line and input line should be connected correctly.
the left is "OUTPUT 12/24V",it connects led strip ,
the right is "INPUT12/24V",it connects the DC wire and power supply ,
also ,the "+" "-" as the order is "- + + -"from left to right ,
the red wire is "+'',
the black wire is "-''.
Note!!!
1. lead wire should be connected correctly according to colors that connecting diagram offers.
2.When input voltage 12-24V,controller work normal.
B style:
1.Passive Infrared Sensor
2.Operating Voltage: DC5V ~ 24V
3.Load Current: 5A
4.Delay Time: 5~10 Seconds, adjustable
5.Detecting Range: 120°
6.Detecting Distance: <8M, adjustable
7.Size: 50 * 26 * 21.5mm / 1.96 * 1.02 * 0.84"
8.Trigger Way: Continuous triggering
9.Light Sensor: 10LUX
10.Color: Black
Features:
Automatic Induction: When people enter into the range of induction, it will output a voltage equal to input voltage, after the delay time, it will output 0V; during the delay time if motion detected, the delay time will reset, and start a new delay time
During the lighting, every effective human activities will cause delay sensor switch extended a period of time automatically
Note:
1.Don’t exposed to direct sun light or lighting, big wind, near a heater or air condition
2.Don’t fix it at a place where there are obstructing material (eg. Glass, dense clothes) which IR cannot get though
3.Don’t fix it in strong shock or vibration environment
4.The PIR Sensor requires a "warm-up time" in order to function properly, about 10s to1min,depend on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready
5.The sensitivity for left-right direction is better than up-down direction, make sure the installation direction is left-right
5.The sensitivity for left-right direction is better than up-down direction, make sure the installation direction is left-right