DRV8825 Stepper Motor Driver Module with Heatsink for 3D Printer / Impressora 3D | Motor - Pontes H

DRV8825 Stepper Motor Driver Module with Heatsink for 3D Printer / Impressora 3D

DRV8825 Stepper Motor Driver Module with Heatsink for 3D Printer

PTR006788
6,77 €
Com IVA

Descrição

DRV8825 Stepper Motor Driver Module with Heatsink for 3D Printer

Description:

The DRV8825 stepper motor driver carrier is a breakout board for TI's DRV8825 microstepping bipolar stepper motor driver.

The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 - 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).

Features:

 - Simple step and direction control interface

 -Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step

 - Can interface directly with 3.3 V and 5 V systems

 - Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout

 - Short-to-ground and shorted-load protection

 - 4-layer, 2 oz copper PCB for improved heat dissipation

 - Exposed solderable ground pad below the driver IC on the bottom of the PCB

 - Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)

 - Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage to achieve higher step rates

 - Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)

 - 45 V maximum supply voltage

 - Built-in regulator (no external logic voltage supply needed)

 

Detalhes do produtos

Clientes que compraram este produto também compraram:

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies