Servo de Rotação Contínua - SpringRC SM-S4303R
Servo de Rotação Contínua - SpringRC SM-S4303R
Servo de Rotação Contínua - SpringRC SM-S4303R
Servo de Rotação Contínua - SpringRC SM-S4303R
Servo de Rotação Contínua - SpringRC SM-S4303R
Servo de Rotação Contínua - SpringRC SM-S4303R
Servo de Rotação Contínua - SpringRC SM-S4303R
Servo de Rotação Contínua - SpringRC SM-S4303R

Servo de Rotação Contínua - SpringRC SM-S4303R

PTR007415
15,93 €
Com IVA

Servo de Rotação Contínua - SpringRC SM-S4303R

Servo de Rotação Contínua - SpringRC SM-S4303R

 

Servo de Rotação Contínua - SpringRC SM-S4303R

Informação do fabricante:

The SM-S4303R is a standard-sized servo that has been built by SpringRC specifically for continuous rotation, making it an easy way to get your robot moving. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. This is the most popular continuous rotation servo we carry.

The SM-S4303R is a standard-sized servo that has been built by SpringRC specifically for continuous rotation. At 6 V, it has a maximum rotation speed of 54 RPM (no-load) and can produce up to 71 oz-in (5.1 kg-cm) of torque. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great actuator for beginner robotics projects.

The SM-S4303R continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. The default rest point is 1.5 ms, but this can be adjusted by using a small screwdriver to turn the middle-point positioner. Pulse widths above the rest point result in counterclockwise rotation, with speed increasing as the pulse width increases; pulse widths below the rest point result in clockwise rotation, with speed increasing as the pulse width decreases.

Note: The spline on this servo is slightly bigger than on our other continuous rotation servos, so some servo horns and wheels might have a tight fit. If you find it difficult to push a compatible servo horn or wheel on by hand, please try the installation method shown in the video below. Similarly, the servo’s mounting tabs are a tight fit with our mounting bracket, so you might consider filing them or the mounting bracket down a little if you want to use them together.

Clientes que compraram este produto também compraram:

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies