L298N - Full-Bridge Motor Driver Dual

L298N - Full-Bridge Motor Driver Dual

L298N - Full-Bridge Motor Driver Dual

The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors.

Referência: PTR000303

9,84 €

Com IVA

Descrição

L298N - Full-Bridge Motor Driver Dual

The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors.

Comes in a staggered, 15-lead Multiwatt package. Check below for a breakout board.

Features:

Operating supply voltage of up to 46V
4.5-7VDC logic supply voltage
Total DC current of up to 4A
Low saturation voltage
Over-temperature protection
Logical '0' input up to 1.5V (high-noise immunity)

Documents:

Datasheet

Detalhes do produtos

Talvez goste

Heatsink TO220 24.4°C/W

Dissipadores

Heatsink TO220 24.4°C/W

Heatsink TO220 24.4°C/WL298, LM317, LM7805, etc

Clientes que compraram este produto também compraram:

Potenciometro Preset 100K 0,1W

Trimmers

Potenciometro Preset 100K 0,1W

Potenciometro Preset 100K 0,1W A potentiometer, informally trimpot or pot, is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider. If only two terminals are used, one end and the wiper, it acts as a variable resistor or rheostat.

DC Barrel Jack Adapter Male

DC Barrel Jack Adapter Male 2

Suporte Pilhas

DC Barrel Jack Adapter Male

DC Barrel Jack Adapter Male This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.

JST XHP 2 Way Header

JST

JST XHP 2 Way Header

JST XHP 2 Way Header

Aluminum Multi-Purpose Servo Bracket

Aluminum Multi-Purpose Servo Bracket 2

Servo Bracket

Aluminum Multi-Purpose Servo Bracket

Aluminum Multi-Purpose Servo Bracket High quality black anodized aluminum multi-purpose standard servo bracket. It is suitable to make Pan/Tilt and multi-axis joints for use in robot arms and legs.

Resistencia 470R 5% 250mW

Resistencias 5% 250mW

Resistencia 470R 5% 250mW

Resistencia 1/4W

HT12D - Remote Control Decoder

Outras Funções

HT12D - Remote Control Decoder

HT12D - Remote Control Encoder

Fio 1/22AWG 1.8A Vermelho 1m

Fio 1/22AWG 1.8A Vermelho 1m 2

Fio electrico

Fio 1/22AWG 1.8A Vermelho 1m

Fio Condutor Singular 1/22AWG 1.8A 1M Vermelho

1N5408 - Standard Diode 3A 1000V

Diodos Standard

1N5408 - Standard Diode 3A 1000V

1N5408 - Standard Diode 3A 1000V

Condensador Electrolitico 22uF 25V

Condensador Electroliticos

Condensador Electrolitico 22uF 25V

Condensador Electrolitico 22uF 25V

4-Digit 7-Segment Display - Verde

4-Digit 7-Segment Display - Verde 2

Display 7 segmentos

4-Digit 7-Segment Display - Verde

4-Digit 7-Segment Display - Verde This is a basic, 4-digit 7-segment display - green in color. It has a common anode. The display features one decimal point per digit, and individually controllable apostrophe and colon points.

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies