Load Cell - 100gr

Load Cell - 100gr

This straight bar load cell 100gr (sometimes called a strain gauge) can translate up to 100gr of pressure (force) into an electrical signal. Load cells are designed to measure a specific force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires a load cell amplifier such as a HX711 load cell amplifier, or Sparkfun Openscale.

Each straight bar load cell is made from an aluminum-alloy and is capable of reading a capacity of 20KG and designed to measure force in one direction. They will often measure force in other directions, but the sensor sensitivity will be different, since parts of the load cell operating under compression are now in tension, and vice versa.

Specification:

• Comprehensive error: 0.05% F.S
• Rated output temperature drift: ≤ 0.15% F.S / 10 ℃
• Output Sensitivity: 1.0 ± 0.1 mV / V
• Zero drift: 0.05% F.S (1 minute)
• Zero point temperature drift: 0.2% F.S / 10 ° C
• Zero output: ± 0.1 mV / V
• Input impedance: 1000 ± 50Ω
• Output impedance: 1000 ± 50Ω
• Overload capacity: 150% F.S
• Recommended excitation voltage: 5-10V
• Operating temperature range: -10 ~ +50 ℃
• Application: for high-precision small-scale weighing for micro-automatic testing equipment, micro-weighing equipment, pushing and pulling equipment, pull pressure test

Connection: red wire to +E,black wire to -E,Verde wire to +S, White wire to -S

Tutorial:

• Getting Started with Load Cells
• Load Cell Amplifier HX711 Breakout Hookup Guide