TMP36 - Temperature Sensor

TMP36 - Temperature Sensor

TMP36 - Temperature Sensor

TMP36 - Temperature Sensor

TMP36 - Temperature Sensor

TMP36 - Temperature Sensor

Referência: PTR001120

3,38 €

Com IVA

Descrição

TMP36 - Temperature Sensor

The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn't require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range. We like it because it's so easy to use: Just give the device a ground and 2.7 to 5.5 VDC and read the voltage on the Vout pin. The output voltage can be converted to temperature easily using the scale factor of 10 mV/°C.

Features:

Voltage Input: 2.7 V to 5.5 VDC
10 mV/°C scale factor
±2°C accuracy over temperature
±0.5°C linearity
Operating Range: −40°C to +125°C

Documents:

Detalhes do produtos

Clientes que compraram este produto também compraram:

USB Micro-B Connector Breakout Board Pololu

USB Micro-B Connector Breakout Board Pololu 2

Ficha USB

USB Micro-B Connector Breakout Board

USB Micro-B Connector Breakout Board This simple board breaks out all five pins of a USB Micro-B connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1" connectors.

Ver

4-Digit 7-Segment Display - Vermelho

4-Digit 7-Segment Display - Vermelho 2

Display 7 segmentos

4-Digit 7-Segment Display - Vermelho

4-Digit 7-Segment Display - Red This is a basic, 4-digit 7-segment display - red in color. It has a common anode. The display features one decimal point per digit, and individually controllable apostrophe and colon points.

Buzzer 12Vdc

Buzzers e Piezos

Buzzer 12Vdc

Buzzer 12Vdc This is a small 23.5mm round buzzer that operates around the audible 3.4kHz range.

Jumper Wires - Connected 6" M/F Pack of 20 Sparkfun

Jumper Wires - Connected 6" M/F Pack of 20 Sparkfun 2

Jumper Wires

Jumper Wires - Connected 6" M/F Pack of 20

Jumper Wires - Connected 6" M/F Pack of 20 These are 6" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board.

Tactile Button 12mm

Tactile Switch

Tactile Button 12mm

Tactile Button 12mm This is a standard 12mm square momentary button.

Ver

Connector KK 2Vias Macho

KK

Connector KK 2Vias Macho

Connector KK 2Vias Macho Polarized connectors and headers for your perf board/PCB projects.

Terminal Block 3P Verde 3.81mm

Terminal Blocks

Terminal Block 3P Verde 3.81mm

Terminal Block 3P Verde 3.81mm This terminal is a 3-pole 130V/10A ultra low profile rising clamp Terminal Block.

4DPI-24-HAT 2.4" Primary Display HAT for the Raspberry Pi

4DPI-24-HAT 2.4" Primary Display HAT for the Raspberry Pi 2

LCD Raspberry Pi

4DPI-24-HAT 2.4" Primary Display HAT for the Raspberry Pi

4DPI-24-HAT 2.4" Primary Display HAT for the Raspberry Pi The 4DPi-24-HAT is a 2.4” 320x240 Primary Display HAT for the Raspberry Pi, which plugs directly on top of a Raspberry Pi and displays the primary output which is normally sent to the HDMI or Composite output.

Ver

Pro Micro - 3.3V - 8MHz Sparkfun

Pro Micro - 3.3V - 8MHz Sparkfun 2

Arduino

Pro Micro - 3.3V - 8MHz

Pro Micro - 3.3V - 8MHz O Pro Micro é semelhante ao Arduino Pro Mini, à exceção de possuir um ATmega32U4 integrado.

Spiral Wrap 7.5-30mm Preta 1m

Spiral Wrap 7.5-30mm Preta 1m 2

Abraçadeiras

Spiral Wrap 7.5-30mm Preta 1m

Spiral Wrap 7.5-30mm Preta 1m

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies