-
ARDUINO
- RASPBERRY
- MICRO:BIT
- KITS
-
COMPONENTES
-
Resistências Elétricas
- Kit de Resistências
- Resistências 1% 125mW
- Resistencias 1% 250mW
- Resistencias 1% 500mW
- Resistencias 1% 600mW
- Resistências 1% 1W
- Resistencias 1% 2W
- Resistências 5% 125mW
- Resistencias 5% 250mW
- Resistencias 5% 500mW
- Resistências 5% 1W
- Resistencias 5% 2W
- Resistencias 5% 3W
- Resistências Potência
- Resistências Várias
- Redes Resistencias
- Termistores
- Trimmers
- Trimmers 3296
- Joysticks
- Botões
- Potenciometro slider
- Potenciometros Rotativos
- Potenciometro Multivolta
- Potenciometros Motorizados
- MODULOS
- SENSORES
- ROBÓTICA
- IMPRESSÃO 3D
-
FERRAMENTAS
Ferramenta Eletronica
- Acessórios
- Analisador Logico
- Alicates para Eletronica
- Berbequins
- Caixas Arrumação
- Chaves de Precisão
- Chaves Ajuste
- Extensões
- Fita Isoladora
- Fonte de Alimentação
- kit Ferramentas
- Lupa Eletronica
- Aparelhos de Medida, Multímetros e Outros
- Osciloscopios
- Pinças para Eletrónica
- Pontas de Prova
- Material Soldadura
- Spray de Limpeza
- Tornos e Suportes
- PROMOÇÕES
- CHEQUE PRENDA
XH-W1209 - Controlador Digital de Temperatura
XH-W1209 - Controlador Digital de Temperatura
O W1209 é um controlador de termostato de baixo custo, mas altamente funcional. Com este módulo pode controlar a maioria dos dispositivos elétricos, com base na temperatura que será detectada pelo sensor de temperatura NTC de alta precisão incluído.
Descrição
XH-W1209 - Controlador Digital de Temperatura
Informação do fabricante:
The W1209 is an incredibly low cost yet highly functional thermostat controller. With this module you can intelligently control power to most types of electrical device based on the temperature sensed by the included high accuracy NTC temperature sensor.
Although this module has anembedded microcontroller no programming knowledge is required. 3 tactile switches allow forconfiguring various parameters including on & off trigger temperatures. The on board relay canswitch up to a maximum of 240V AC at 5A or 14V DC at 10A. The current temperature is displayed indegrees Centigrade via its 3 digit seven segment display and the current relay state by an on boardLED.
Specifications:
- Temperature Control Range: -50 ~ 110 C
- Resolution at -9.9 to 99.9: 0.1 C
- Resolution at all other temperatures: 1 C
- Measurement Accuracy: 0.1 C
- Control Accuracy: 0.1 C
- Refresh Rate: 0.5 Seconds
- Input Power (DC): 12V
- Measuring Inputs: NTC (10K 0.5%)
- Waterproof Sensor: 0.5M
- Output: 1 Channel Relay Output, Capacity: 10A
Power Consumption
- Static Current: <=35mA
- Current: <=65mA
Environmental Requirements
- Temperature: -10 ~ 60 C
- Humidity: 20-85%
Dimensions
48mm x 40mm x 14mm