MIDI Shield | Shields Audio
MIDI Shield | Shields Audio
MIDI Shield | Shields Audio
MIDI Shield | Shields Audio
MIDI Shield | Shields Audio
MIDI Shield | Shields Audio
MIDI Shield | Shields Audio
MIDI Shield | Shields Audio

MIDI Shield

MIDI Shield


The MIDI Shield board gives your Arduino access to the powerfulMIDI communication protocol

PTR001220
Últimas unidades em stock
41,39 €
Com IVA

Descrição

MIDI Shield

The MIDI Shield board gives your Arduino access to the powerful MIDI communication protocol, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your Arduino to send and receive MIDI's event messages.

The MIDI Shield provides an opto-isolated MIDI-IN port as well as a MIDI-OUT port. The MIDI Shield can be mounted directly on top of an Arduino, connecting the MIDI-IN to the Arduino's hardware RX pin and the MIDI-OUT to TX. Potentiometers are connected to analog pins 1 and 2, and can be used to control volume, pitch, tone or anything else you'd like. Also connected on the shield are three momentary push buttons (connected to D2-4), a reset button, and green and red stat LEDs. The RUN/PROG switch allows you to program the Arduino over serial without having to remove the shield.

Note: The MIDI Shield does not come with the through-hole MIDI connectors or trimpots soldered on. All of these components (2 MIDI connectors and 2 trimpots) are included with the product, however.

Documents:

  • Schematic
  • Example Arduino Sketch
  • Arduino MIDI Tutorial

 

Detalhes do produtos

Clientes que compraram este produto também compraram:

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies