Breakout Board for MAX7456 On Screen Display | _Obsoletos
Breakout Board for MAX7456 On Screen Display | _Obsoletos
Breakout Board for MAX7456 On Screen Display | _Obsoletos
Breakout Board for MAX7456 On Screen Display | _Obsoletos
Breakout Board for MAX7456 On Screen Display | _Obsoletos
Breakout Board for MAX7456 On Screen Display | _Obsoletos
Breakout Board for MAX7456 On Screen Display | _Obsoletos
Breakout Board for MAX7456 On Screen Display | _Obsoletos

Breakout Board for MAX7456 On Screen Display

Breakout Board for MAX7456 On Screen Display

This is a breakout board for the Maxim MAX7456  monochrome on-screen display chip. The board is set up with all supporting circuitry and RCA connectors to allow the user to easily interrupt and overlay text and/or graphics onto a video signal (PAL or NTSC).

 

PTR001781
Últimas unidades em stock
43,60 €
Com IVA

Descrição

Breakout Board for MAX7456 On Screen Display

This is a breakout board for the Maxim MAX7456  monochrome on-screen display chip. The board is set up with all supporting circuitry and RCA connectors to allow the user to easily interrupt and overlay text and/or graphics onto a video signal (PAL or NTSC). Just plug in your video signal to "Video In", plug your TV into "Video Out", connect a microcontroller to the SPI interface and supply the board with 5V@100mA (worst case) and you're good to go. Supplied sample code runs on an ATMega168/328 (16MHz) and compiles with WinAVR, so it's just about "plug-and-play" with an Arduino board.

Features:

  • Input voltage 5V
  • Current consumption 100mA, worst case
  • 5V SPI interface

Dimensions: 1.8x0.9"
Weight: 0.30 ounces, 8.6 grams

Documents:

Detalhes do produtos

Clientes que compraram este produto também compraram:

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies