-
ARDUINO
- RASPBERRY
- MICRO:BIT
- KITS
-
COMPONENTES
-
Resistências Elétricas
- Kit de Resistências
- Resistências 1% 125mW
- Resistencias 1% 250mW
- Resistencias 1% 500mW
- Resistencias 1% 600mW
- Resistências 1% 1W
- Resistencias 1% 2W
- Resistências 5% 125mW
- Resistencias 5% 250mW
- Resistencias 5% 500mW
- Resistências 5% 1W
- Resistencias 5% 2W
- Resistencias 5% 3W
- Resistências Potência
- Resistências Várias
- Redes Resistencias
- Termistores
- Trimmers
- Trimmers 3296
- Joysticks
- Botões
- Potenciometro slider
- Potenciometros Rotativos
- Potenciometro Multivolta
- Potenciometros Motorizados
- MODULOS
- SENSORES
- ROBÓTICA
- IMPRESSÃO 3D
-
FERRAMENTAS
Ferramenta Eletronica
- Acessórios
- Analisador Logico
- Alicates para Eletronica
- Berbequins
- Caixas Arrumação
- Chaves de Precisão
- Chaves Ajuste
- Extensões
- Fita Isoladora
- Fonte de Alimentação
- kit Ferramentas
- Lupa Eletronica
- Aparelhos de Medida, Multímetros e Outros
- Osciloscopios
- Pinças para Eletrónica
- Pontas de Prova
- Material Soldadura
- Spray de Limpeza
- Tornos e Suportes
- PROMOÇÕES
- CHEQUE PRENDA
DS1302 Real Time Clock Module
DS1302 Real Time Clock Module
Stock atualizado em tempo real e entregas em 24h-48h.
Compre com confiança!
Descrição
DS1302 Real Time Clock Module
Module voltage compatible with 3.3V / 5V, can be connected to 3.3V or 5V SCM
3v 260mAh backup battery(not rechargeable batteries)
Crystal oscillator 32.768KHz
Working temperature 0°C to 70°C
4 positioning holes, diameter 3.1mm
Size: 44 x 23 x 1.6mm
Feature:
The real time clock has the ability of calculating prior to the 2100 second, minute, hour, day, week, month, year, and the ability to adjust a leap year
31 8 temporary data storage RAM
Serial I / O port pin makes the least number of ways
Wide range of operating voltage 2.0V - 5.5V
When The working voltage is 2.0V, the current is less than 300nA
Read/write clock or RAM data have two transmission way: Single-byte / many bytes group
8 feet DIP assembly or optional 8 feet SOIC encapsulation according to surface assembly
Simple 3 line interface
Optional industrial temperature range -40°C to +85°C
Dual power tube for the main power and backup power supply
TTL compatible(Vcc = 5V)
Note:
Do not reverse VCC and GND, it will cause damage.
It requires a pull-up resistor for P0 port of 51 MCU, if without, you can connect the data cable to other terminal.
Battery not included.
Tradução em Português brevemente disponível!