-
ARDUINO
- RASPBERRY
- MICRO:BIT
- KITS
-
COMPONENTES
-
Resistências Elétricas
- Kit de Resistências
- Resistências 1% 125mW
- Resistencias 1% 250mW
- Resistencias 1% 500mW
- Resistencias 1% 600mW
- Resistências 1% 1W
- Resistencias 1% 2W
- Resistências 5% 125mW
- Resistencias 5% 250mW
- Resistencias 5% 500mW
- Resistências 5% 1W
- Resistencias 5% 2W
- Resistencias 5% 3W
- Resistências Potência
- Resistências Várias
- Redes Resistencias
- Termistores
- Trimmers
- Trimmers 3296
- Joysticks
- Botões
- Potenciometro slider
- Potenciometros Rotativos
- Potenciometro Multivolta
- Potenciometros Motorizados
- MODULOS
- SENSORES
- ROBÓTICA
- IMPRESSÃO 3D
-
FERRAMENTAS
Ferramenta Eletronica
- Acessórios
- Analisador Logico
- Alicates para Eletronica
- Berbequins
- Caixas Arrumação
- Chaves de Precisão
- Chaves Ajuste
- Extensões
- Fita Isoladora
- Fonte de Alimentação
- kit Ferramentas
- Lupa Eletronica
- Aparelhos de Medida, Multímetros e Outros
- Osciloscopios
- Pinças para Eletrónica
- Pontas de Prova
- Material Soldadura
- Spray de Limpeza
- Tornos e Suportes
- PROMOÇÕES
- CHEQUE PRENDA
Português
EUR €
ESP8266 Módulo Relé WiFi 1Canal 5V
ESP8266 Módulo Relé WiFi 1Canal 5V
ESP8266 Módulo Relé WiFi 1Canal 5V
Descrição
ESP8266 Módulo Relé WiFi 1Canal 5V
Informação do fabricante:
- Onboard Module:ESP8266 wifi module;in AP mode it can connect with 5 Clients at the same time
- Operating Way:cellphone carried on wifi module;cellphone and wifi module carried on the same router,and use APP to control relay
- Transmission Distance:400m (max)
- Relay:5V,10A/250V AC 10A/30V DC
- Baud Rate:9600,8,1,0,0
- Features:diode effusion protection;short response time
Use method introduction
On board ESP8266 11 WIFI module has three types of work: STA (client), AP (heat Point) and STfA + AP (client + hot), according to the work of the module to select the corresponding WIFI model h ead to work mode.
Before using the need to use serial debugging software and USB to TTL module to send serial port instructions on the WIFI module into l ine configuration (after the completion of the configuration do not power, because the WIFI module after some of the parameters can not be saved)
Mobile phone and WIFI module to establish a network connection can use the mobile phone APP control relay.