Plataforma Lilypad, Flora e Gemma
LilyPad Vibe Board Apply 5V and be shaken by this small, but powerful vibration motor.
Woven Conductive Fabric - 20cm square This woven conductive fabric is silver colored and made of Copper+Nickel-plated nylon
Circuit Playground Classic Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sewing required!
LilyPad Rainbow LED (6 Colors) This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up.
LilyPad LED Blue (5pcs) This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.
FLORA Accelerometer/Compass Sensor - LSM303 - v1.0 Add motion and direction sensing to your wearable FLORA project with this high precision 3-axis Accelerometer+Compass sensor.
LilyPad Pixel Board We know you love adding color to your e-textiles, adding the LilyPad Pixel Board to your project will only make it better. The pixel board is equipped with a WS2812B which is actually an RGB LED with a WS2811 built right into the LED! Several of these breakouts can be chained together to form a display or an addressable string.
LilyPad Buzzer This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.
LilyPad Simple Power The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off.
ProtoSnap - LilyPad Development Board The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project.
FLORA 9-DOF Accelerometer Gyroscope Magnetometer - LSM9DS0 Add motion, direction and orientation sensing to your wearable FLORA project with this high precision 9-DOF sensors. Inside are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is...
Fabric Ribbon 4-Channel Wire - 1 Yard This lightweight, flexible fabric ribbon channel contains four individual wires, perfect for wiring up wearables where flexibility is key.