A PTRobotics não dispõe de serviço de balcão. Faça a sua encomenda na Loja Online.
Envios por MRW, Nacex, Rede DPD Pickup Points e Recolha em armazém PTRobotics.
Encomendas iguais ou superiores a 75€ oferta dos Portes de Envio (Portugal Continental)
MBWay, Paypal, Multibanco, Transf. Bancária, Pag. no Armazém ou Envios à Cobrança.
With this prefabricated Arduino project you can playfully implement Arduino programming. The robot is powered by only four servo motors (SG90). He can run, dance and learn entire choreographies - almost like a real person!
There is an HC-SR04 ultrasonic sensor on the front that the robot uses to detect objects. This gives Otto the ability to avoid objects and avoid collisions. The Otto robot also has a small loudspeaker with which it can make its presence known in a very cute way.
The combination of all these practical features makes the Otto robot a real universal hero - ideal for the educational sector!
Note on the Funduino Otto robot:
With the “OttoDIY” housings, the power supply is switched on and off with a switch. With the Otto robot from Funduino, the power supply is plugged into the shield outside the robot. This means that our Otto robot can be put into operation without any soldering tools. Our Otto robot is fully compatible with the English language instructions and codes from www.ottodiy.com
Scope of delivery (for variations “without housing” and “with housing”)
1* Funduino NANO R3 with CH340 chip (Arduino compatible) incl. USB cable
4* Servo SG90
1* Expansion shield for Arduino UNO/NANO (I/O Shield - Protoshield)
1* HC-SR04 ultrasonic sensor
1* speaker
10* plug-in cables
1* 9V battery cable (no battery included)
1* DC adapter with screw terminals (any voltage sources can be used with this adapter; the cable ends are attached to the adapter and plugged into the power supply socket of the NANO-Shield)
1* on/off switch (not needed with the “Funduino-Otto” housing, but is still included for completeness)
Screws and servo accessories
Scope of delivery (only for the “with housing” version)
1* Housing upper part with recesses for the HC-SR04 ultrasonic sensor
1* housing base part
2* legs
1* foot (left)
1* foot (right)
All components are manufactured by us using 3D printing.
Further links to "Otto Robot - DIY experiment kit, Arduino controlled"
Helpful information from OttoDIY (programming examples, assembly instructions)
