IBoard Pro

IBoard Pro

The IBoard Pro is a unique Arduino board which features a WIZnet Ethernet port with POE, an XBee socket, ITDB02 Serial/Parallel LCD module interface, RTC, nRF24L01+ module interface, Micro SD socket and an ATMega2560. This board will add wireless XBee control as well as internet connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless!

IBoard Pro can be used as an Ethernet, wireless communication project development platform. IBoard Pro support POE (power on Ethernet) power supply, and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. You can setup a web server through which you may communicate with a remote Arduino using XBee radios, bluetooth or APC modules. This information can be posted to a web site, or to Twitter.

The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Iboard can be powered by a mini USB , power Jack or POE.

Documents

Datasheet: DS_IM120724002_IBoardPro.pdf

Schematic: SCH_IM120724002_IBoardPro.pdf

Demo Code: DC_IM120724002_IBoardPro.zip

Fritzing Parts: Fri_IM120724002_IBoardPro.zip

Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials.

Specifications

• Microcontroller ATMega2560
• Max Frequency 16MHz 8K RAM Capacity
• FLASH Capacity 256K
• External Resources 
• Onboard SD socket
• Onboard Ethernet
• Display Socket
• Electronic Brick Interface
• Power Supply External >24V
• I/O Operation Level 3.3V
• Board Size 124.46mm x 72.39mm
• Model IM120724002
• Version 1.0
• Weight 80.00g