Kit de Desenvolvimento ESP8266 - Estação Meteorológica

ESP8266 weather station kit with DHT11 temperature humidity, BMP180 atmospheric pressure, BH1750FVI light sensor, 0.96" OLED display by SunRobotics.The ESP8266 is a low-cost Wi-Fi microchip with a full TCP/IP stack and microcontroller capability. DHT11 temperature-humidity uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins are needed). BMP180 atmospheric pressure sensor with temperature, and barometric pressure is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI. BH1750FVI is a digital Ambient Light Sensor having an I2C interface. This IC is suitable for obtaining ambient light data. It is possible to detect a wide range at high resolution. 0.96" OLED I2C displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. 

Key point:

A basic beginner kit with all the necessary components to jumpstart your interest in learning and making your own projects.

A complete starter kit that includes a development board fully compatible with ESP8266.

Feature:

Best kit for beginners who are interested in making and learning about wi-fi.

A complete starter kit includes a variety of components.

With the ESP8266 For Arduino Makers kit, you get what you want, what you need 

Package includes:

1 X NodeMCU V2 - ESP8266 Development Board

1 x BMP180 Barometric Digital Pressure Sensor Module

1 x GY-30 BH1750FVI Digital Light Intensity Illumination Sensor Generic

1 X OLED 0.96 Inch I2C Display Module 4 Pin

1 X USB cable

1 X DHT11 Temperature & Humidity Sensor Module

2 X Mini Breadboard For Arduino

20 x Male-Female Jumper Wires

Downloads:

Arduino Software