SN04-N Inductive Proximity Sensor
This is a NPN type Inductive Proximity Sensor also called as proxy switch which can be used to detect metal upto 5mm. The distance may vary according to metal size. This is a Square Type low cost water proof and dust proof proximity sensor with LED indicator and easy Mounting.
SN04-N Sensor is very easy to use can be used with PLC for CNC applications.
- Brown: +VDD
- Blue: GND
- Black: Signal
Specification SN04-N Inductive Sensor
- Output: NPN NO
- Operating Voltage: 12 to 24 Volt DC
- Current Consumption: <8mA
- Reverse polarity protection YES
- Function Normally Open
- Load Current 200 mA max.
- Frequency 600Hz
- Sensing Range
- Rated Distance 5 mm
- Recommended Distance 3.2 mm
- Hysteresis 10% of Sensing Range
- Environment Ratings
- Ambient Temperature -20~+70°C
Detalhes do produtos
Clientes que compraram este produto também compraram:
Fontes de alimentação
Motor DC com Engrenagens
47:1 Metal Gearmotor 25Dx52L mm HP with 48 CPR Encoder
47:1 Metal Gearmotor 25Dx52L mm HP with 48 CPR Encoder This cylindrical, 2.54" x 0.98" x 0.98" gearmotor uses a brushed DC motor with extra-strong magnets and a 46.851:1 metal gearbox to deliver a lot of power in a relatively small package. It has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 2249 counts per revolution of the...
Motor - Pontes H
Pololu Dual VNH5019 Motor Driver Shield for Arduino
Pololu Dual VNH5019 Motor Driver Shield for Arduino Get your Arduino moving! This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor.