Color LCD - Breakout Board  | LCD Grafico | Elecfreaks
Color LCD - Breakout Board  | LCD Grafico | Elecfreaks
Color LCD - Breakout Board  | LCD Grafico | Elecfreaks
Color LCD - Breakout Board  | LCD Grafico | Elecfreaks
Color LCD - Breakout Board  | LCD Grafico | Elecfreaks
Color LCD - Breakout Board  | LCD Grafico | Elecfreaks
Color LCD - Breakout Board  | LCD Grafico | Elecfreaks
Color LCD - Breakout Board  | LCD Grafico | Elecfreaks

Color LCD - Breakout Board

PTR005241
15,38 €
Com IVA

Color LCD - Breakout Board 

This breakout board for the popular Nokia 6100 Knock-off color LCD has an improved backlight driver circuit, plus a tri-color status LED and 2 pushbuttons we given you, all accessed through one 9-pin 0.1" spaced header.

 

Color LCD - Breakout Board 

Description:

This breakout board for the popular Nokia 6100 Knock-off color LCD has an improved backlight driver circuit (boosts to 7V) , plus a tri-color status LED and 2 pushbuttons we given you, all accessed through one 9-pin 0.1" spaced header. Vbat and the 3.3V input can be driven from the same regulated 3.3V source, but the device will draw more current than if the Vbat input was driven from a higher source voltage. For an estimate of the current draw for a given input voltage, refer to the chart on the schematic file below.

This breakout is set up for serial communication to the display and comes with the Nokia 6100 display attached and stand-offs as photographed.

xxx

Feature

  • All Shield base on Philips PCF8833 controller
  • Nokia LCD6100
  • Backlight PWM control "BKL"
  • 128 x 128 pixels
  • 12-bit color rendition (4 bits red, 4-bits green, 4-bits blue)

Resources:

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies