Kit Inventor para BBC Micro:bit - Versão Python

Kit Inventor para BBC Micro:bit - Versão Python

Informação do fabricante:

The Kitronik Inventor's Kit - Python version for the BBC micro:bit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, photoresistors and capacitors. To get you off to a flying start, we have included an easy to follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. You'll be programming and creating circuits in no time!

The tutorial offers step by step guides to all 10 experiments. Experiments 1 - 6 are coded with MakeCode Blocks and experiments 7 - 10 are coded with the MakeCode Python editor. The Python version tutorial booklet has been written especially for this version and will walk the user through creating the code and the circuits. In the original Inventor's kit experiments 7 - 10 are coded with JavaScript.

The Kitronik Inventor's Kit - Python version for the BBC micro:bit provides a fantastic way of learning how to construct and control electronic circuits. The BBC micro:bit has a selection of pins that are located on the bottom edge of its PCB. By using our specially designed Edge Connector Board for the BBC micro:bit in conjunction with the breadboard, it is easy to use these pins to connect additional components to the BBC micro:bit.

This kit is available as a single pack or as a pack of 20 for the classroom. 

Note:

• This kit requires assembly.
• The kit ships with a booklet with detailed instructions and diagrams for all 10 experiments.
• No soldering is required and you can build your first circuit in minutes!
• This kit does not include a BBC microbit.
• If you purchase a microbit separately you may also need to purchase a Battery Cage and a USB Cable, depending on which microbit option you purchase.
• This kit is available as a single kit or as a 20 pack.

Features:

• No soldering required - build your first circuit in minutes!
• Make 10 experiments included in the provided step-by-step tutorial book.
• As your skill grows, progress from Blocks to Python all within the MakeCode environment.
• Experiments 1 - 6 are blocks orientated.
• Experiments 7 - 10 are now completed with Python.
• All parts are included to conduct the 10 experiments (listed below).
• Breaks out 21 accessible pins from the BBC micro:bit using the Edge Connector Board for the BBC micro:bit (included).
• Small Prototype Breadboard included for fast prototyping.

Contents:

Every single pack contains:

1 x Mounting Plate.

1 x Potentiometer - Vertical Type (finger adjust) 100K.

1 x Finger Adjust Spindle.

2 x Plastic Spacer 10mm.

1 x Sticky Fixer for Battery Pack.

1 x Small Prototype Breadboard.

1 x Terminal Connector.

4 x Push Switch.

1 x Motor.

1 x Transistor.

2 x Vermelho 5mm LED.

2 x Orange 5mm LED.

2 x Amarelo 5mm LED.

2 x Verde 5mm LED.

1 x RGB 5mm LED.

1 x Fan Blade.

5 x 2.2KΩ Resistor.

5 x 10KΩ Resistor.

5 x 47Ω Resistor.

1 x Edge Connector Breakout Board for BBC micro:bit.

10 x Male to Male Jumper Wires.

10 x Male to Female Jumper Wires.

1 x 470uF Electrolytic Capacitor.

1 x Piezo Element Buzzer.

4 x Pan Head M3 Machine Screw.

1 x Phototransistor. 

Requires:

1 x BBC micro:bit or BBC micro:bit V2.

1 x Phillips Screwdriver.

1 x Terminal Block Screwdriver.

1 x Micro USB Cable.

All of the experiments included in the booklet (listed below) are completed using the Microsoft MakeCode Editor.