-
ARDUINO
- RASPBERRY
- MICRO:BIT
- KITS
-
COMPONENTES
-
Resistências Elétricas
- Kit de Resistências
- Resistências 1% 125mW
- Resistencias 1% 250mW
- Resistencias 1% 500mW
- Resistencias 1% 600mW
- Resistências 1% 1W
- Resistencias 1% 2W
- Resistências 5% 125mW
- Resistencias 5% 250mW
- Resistencias 5% 500mW
- Resistências 5% 1W
- Resistencias 5% 2W
- Resistencias 5% 3W
- Resistências Potência
- Resistências Várias
- Redes Resistencias
- Termistores
- Trimmers
- Trimmers 3296
- Joysticks
- Botões
- Potenciometro slider
- Potenciometros Rotativos
- Potenciometro Multivolta
- Potenciometros Motorizados
- MODULOS
- SENSORES
- ROBÓTICA
- IMPRESSÃO 3D
-
FERRAMENTAS
Ferramenta Eletronica
- Acessórios
- Analisador Logico
- Alicates para Eletronica
- Berbequins
- Caixas Arrumação
- Chaves de Precisão
- Chaves Ajuste
- Extensões
- Fita Isoladora
- Fonte de Alimentação
- kit Ferramentas
- Lupa Eletronica
- Aparelhos de Medida, Multímetros e Outros
- Osciloscopios
- Pinças para Eletrónica
- Pontas de Prova
- Material Soldadura
- Spray de Limpeza
- Tornos e Suportes
- PROMOÇÕES
- CHEQUE PRENDA
Serial Bluetooth Module
Serial Bluetooth Module
Stock atualizado em tempo real e entregas em 24h-48h.
Compre com confiança!
Descrição
Serial Bluetooth Module
This small size Bluetooth TTL transceiver module allows your target device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. It's easy to use and completely encapsulated.
PIN define:
STATE -You can connect a external LED to indicate the bluetooth state. It same as the state LED on the module.
RXD -Receive data
TXD -Send data
GND -Power ground
VCC -DC power in (3.6V-6VDC)
KEY -Turn on/off this module by this pin.(1- OFF, 0/Open- ON)
Specifications:
TTL data transparent transfer between a host Bluetooth device.
Works with any USB Bluetooth adapters.
Default Baud Rate: 9600,8,1,n. Device Name:tinyos key:1234
Coverage up to 30ft.
Built in antenna.
Power input: 3.6V-6VDC(Can not higher than 6V).
Mini Size.
AT command sets
Communication test
Send 'AT',If module received this command success the module will reply 'OK'
Change Baud Rate
Modify the Baud Rate of the module:Send 'AT+BAUD1' (BAUD must be capitalized),If setting success the module will reply 'OK1200'
The number after BAUD means the baud rate you want set:
1----1200bps
2----2400bps
3----4800bps
4----9600bps
5----19200bps
6----38400bps
7----57600bps
8----115200bps
9----230400bps
A----460800bps
B----921600bps
C----1382400bps
Change Device Name
Send 'AT+NAMEname',If module received this command success the module will reply 'OKname'
Change Pair number
Send 'AT+PINxxxx',If module received this command success the module will reply 'OKsetpin'
xxxx is that pair number you want to set. It must be 4 digits.
Document:
Tradução em Português brevemente disponível!