Arduino Primo

Arduino Primo

The PRIMO CORE is a compact device, using a Nordic nrf52832 chip with Bluetooth smart (BLE 4.0) and NFC-A tag functions , and also integrated motion and environmental sensors. The low power consumption permits powering the Primo Core with a coin cell battery.

The Arduino PRIMO CORE can be mounted on a breakout board to extend its functionalities.

OVERVIEW DOCUMENTATION

Arduino Primo Core is the compact Arduino board developed in cooperation with Nordic Semiconductor.

For the little dimension, the Bluetooth integrated and the Low Power the board is ideal for IoT world and in particular for the wearables.

The Microcontroller used is the same of the Arduino Primo, the Nordic microcontroller nRF52832. It needs an external programmer, for example Atmel ICE, or an Arduino Primo.

Furthermore the Arduino Primo Core has: 

10 digital input/output pins

10 PWM (all digital pins)

8 analog pins (from D0 at D7)

Accelerometer and Gyroscope

Temperature and Humidity sensor

RGB Led

SWD connector (to program the board using an external programmer)

A coin cell battery connector

BLE interface

LED

NFC connector (to use an external NFC Antenna)

Reset buttons (to reset the microcontroller)

On/Off switch for powering the board

The Arduino Primo Core can be programmed in different ways, using :

an external programmer, for example Atmel ICE;

an Arduino Primo.

Tradução em Português brevemente disponível!