Categorias

Siga-nos no Facebook

  • 13,84 € Em stock
    Novo

    SparkFun Humidity and Temperature Sensor Breakout - Si7021 The Si7021 is a low-cost, easy-to-use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and data logging and perfect for build a weather stations or humidor control system. 

    13,84 €
    11,25 € (sem IVA)
    Em stock
  • 0,37 € Em stock
    Novo

    IDC Header Straight 6Way Simple shrouded 6-pin connector. 

    0,37 €
    0,30 € (sem IVA)
    Em stock
  • 6,64 € Em stock
    Novo

    PICAXE-14 Project Board Kit A small self assembly board to allow rapid prototyping of PICAXE-14M2 circuits.

    6,64 €
    5,40 € (sem IVA)
    Em stock
  • 4,43 € Em stock
    Novo

    PICAXE-08 Proto Board Kit A small self assembly board to allow rapid prototyping of PICAXE-08M2 circuits.

    4,43 €
    3,60 € (sem IVA)
    Em stock
  • 27,68 € Em stock
    Novo

    PICAXE-28X/40X Proto Board (assembled) Assembled version of the AXE022 kit to allow rapid prototyping of PICAXE-28X2 or 40X2 circuits. Includes all components including download socket.

    27,68 €
    22,50 € (sem IVA)
    Em stock
  • 22,14 € Em stock
    Novo

    PICAXE USB Download Cable Essential purchase! - the PICAXE USB download cable can be used with all PICAXE project boards and chip sizes, so purchase once and then use over and over again with all your PICAXE projects.

    22,14 €
    18,00 € (sem IVA)
    Em stock
  • 0,04 € Em stock
    Novo

    Porca M2.5

    0,04 €
    0,03 € (sem IVA)
    Em stock
  • 42,44 € Em stock
    Novo

    SparkFun Blynk Board - ESP8266 Blynk is an easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB controllers to their phone. The SparkFun Blynk Board is specially designed to work with the ‘widgets’ within the Blynk mobile app to create your next IoT project.

    42,44 €
    34,50 € (sem IVA)
    Em stock
  • 55,35 € Em stock
    Novo

    MyoWare Muscle Sensor Using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks… but what if we could take the buttons, levers and joysticks out of the equation?

    55,35 €
    45,00 € (sem IVA)
    Em stock
  • 16,61 € Em stock
    Novo

    SparkFun Triple Axis Magnetometer Breakout - HMC5883L This is a breakout board for Honeywell’s HMC5883L, a 3-axis digital compass. Communication with the HMC5883L is simple and all done through an I2C interface.

    16,61 €
    13,50 € (sem IVA)
    Em stock
  • 4,61 € Em stock
    Novo

    MyoWare Power Shield The MyoWare Power Shield is designed to take two standard CR2032 coin cell batteries to power the MyoWare Muscle Sensor.

    4,61 €
    3,75 € (sem IVA)
    Em stock
  • 38,75 € Em stock
    Novo

    WIZnet W5100 Network Module with Mag Jack - WIZ811MJ WIZnet’s WIZ811MJ works as a breakout board for their W5100 embedded TCP/IP chip. Also included on the board is an RJ-45 MagJack connector (RJ45 with X’FMR). It can be used as a component and little effort is required to interface to the W5100.

    38,75 €
    31,50 € (sem IVA)
    Em stock
  • 2,77 € Em stock
    Novo

    MyoWare Proto Shield This is the MyoWare Proto Shield, a simple proto-board for your MyoWare Muscle Sensor. With this shield you will be able to use the area provided to solder on whatever custom circuitry you can come up with. This shield provides 8 x 15 solderable through holes on a standard 0.1" grid.

    2,77 €
    2,25 € (sem IVA)
    Em stock
  • 10,95 € Em stock
    Novo

    100g Micro Load CellA load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations on the structure.

    10,95 €
    8,90 € (sem IVA)
    Em stock
  • 10,82 € Em stock
    Novo

    20 Kg Micro Load Cell A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations on the structure. Load cells are designed to measure a specific force, and ignore other forces being applied.

    10,82 €
    8,80 € (sem IVA)
    Em stock
  • 14,51 € Em stock
    Novo

    Wio Node Wio Node is designed to simplify your IoT development. It is an ESP8266 based open-source Wi-Fi development board to create IoT applications by virtualizing plug-n-play modules to RESTful APIs with mobile APPs.

    14,51 €
    11,80 € (sem IVA)
    Em stock
  • 88,68 € Em stock

    The Arduino Starter Kit This kit walks you through the basics of using the Arduino in a hands-on way.

    88,68 €
    72,10 € (sem IVA)
    Em stock
  • 23,75 € Em stock

    Arduino Uno The Arduino Uno is a microcontroller board based on the ATmega328.

    23,75 €
    19,31 € (sem IVA)
    Em stock
  • 24,60 € Esgotado

    Genuino Uno R3The Genuino UNO R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

    24,60 €
    20,00 € (sem IVA)
    Comprar Mais
    Esgotado
  • 43,48 € Em stock

    Genuino Mega 2560 R3The Genuino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

    43,48 €
    35,35 € (sem IVA)
    Em stock
  • 6,15 € Em stock

    Atmega328 Arduino Uno Bootloader ATmega328 in DIP package, pre-loaded with the Arduino Uno (16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.

    6,15 €
    5,00 € (sem IVA)
    Em stock
  • 46,49 € Esgotado

    Raspberry Pi 2  - 1Gb 900Mhz Quad Core - 6x faster Didn't think the Raspberry Pi could get any better? The Raspberry Pi 2 Model B is out - this pocket computer has moved from being a 'toy' to a real desktop PC!

    46,49 €
    37,80 € (sem IVA)
    Comprar Mais
    Esgotado
  • 24,23 € Em stock

    KIT Workshop PTRobotics without Arduino Uno or Genuino UNO The KIT Workshop PTRobotics is a great for beginners and weathered professionals alike. This version come without Arduino.

    24,23 €
    19,70 € (sem IVA)
    Em stock
  • 47,23 € Em stock

    Raspberry Pi 3 Everyone knows and loves Raspberry Pi, but what if you didn’t need additional peripherals to make it wireless. The Raspberry Pi 3 is here to provide you with the same Pi as before but now with double the ram and a much faster processor. 

    47,23 €
    38,40 € (sem IVA)
    Em stock

Componentes para electrónica e robótica. Do Estudante ao Engenheiro, pretendemos desmistificar, simplificar e tornar acessível o mundo da robótica e da electrónica e despertar o Inventor, Engenheiro e Designer que existe dentro de cada um de nós!

Representamos as marcas Arduino, Sparkfun, Pololu, Adafruit, Seeed, DFRobot, iTead, Makerbeam, Ikalogic, entre outros fabricantes mundiais de componentes electrónicos em Portugal.
Todo o nosso stock é actualizado em tempo real e só possivel encomendar através da loja online produtos que existam em stock. Produtos não disponiveis ou que não constam da loja, deverá pedir mais informações preferencialmente através dos nossos e-mails.

O seu comentário e sugestão é importante para nós, ajude-nos a melhorar.

PTRobotics - Férias 2016

ENTA Team SAT2 PTRobotics

Em nome da equipa ENTA Team SAT2 gostaria de endereçar à PTRobotics o nosso sincero agradecimento pelo apoio dado à nossa equipa que venceu a competição nacional CanSat Portugal 2016, em abril último, e mais recentemente consegui o primeiro lugar na competição European CanSat Competition 2016, em representação de Portugal. Pelo esforço em responder sempre com a máxima rapidez às nossas necessidades técnicas, pelo rigor no cumprimento dos prazos e pela extraordinária competência dos vossos colaboradores. Resultados na ESA.

Esperamos continuar a contar convosco para projetos futuros. Duarte Nuno Cota - Team mentor

PTRobotics destacada no Blog Arduino Genuino

RobotCraft 2016 - Inscrições Abertas