-
ARDUINO
- RASPBERRY
- MICRO:BIT
- KITS
-
COMPONENTES
-
Resistências Elétricas
- Kit de Resistências
- Resistências 1% 125mW
- Resistencias 1% 250mW
- Resistencias 1% 500mW
- Resistencias 1% 600mW
- Resistências 1% 1W
- Resistencias 1% 2W
- Resistências 5% 125mW
- Resistencias 5% 250mW
- Resistencias 5% 500mW
- Resistências 5% 1W
- Resistencias 5% 2W
- Resistencias 5% 3W
- Resistências Potência
- Resistências Várias
- Redes Resistencias
- Termistores
- Trimmers
- Trimmers 3296
- Joysticks
- Botões
- Potenciometro slider
- Potenciometros Rotativos
- Potenciometro Multivolta
- Potenciometros Motorizados
- MODULOS
- SENSORES
- ROBÓTICA
- IMPRESSÃO 3D
-
FERRAMENTAS
Ferramenta Eletronica
- Acessórios
- Analisador Logico
- Alicates para Eletronica
- Berbequins
- Caixas Arrumação
- Chaves de Precisão
- Chaves Ajuste
- Extensões
- Fita Isoladora
- Fonte de Alimentação
- kit Ferramentas
- Lupa Eletronica
- Aparelhos de Medida, Multímetros e Outros
- Osciloscopios
- Pinças para Eletrónica
- Pontas de Prova
- Material Soldadura
- Spray de Limpeza
- Tornos e Suportes
- PROMOÇÕES
- CHEQUE PRENDA
Módulo Relé 12V LDR Sensor Luz Auto
Módulo Relé 12V LDR Sensor Luz Auto
Módulo Relé 12V LDR Sensor Luz Auto
Descrição
Módulo Relé 12V LDR Sensor Luz Auto
Informação do fabricante:
- Working voltage: DC 12V
- Working current: > 100mA
- Output forms: AC 250V 10A or DC30V 10A ( can be used within the range of lower than 10A current )
- 12V power is specially used for the relay. On board 78L05 regulator transistors is used for sensor and comparator, to make the product more stable and reliable;
- Onboard opto-isolator driven relay, can effectively protect the chip, to make sure the product more reliable work.
- With four mounting bolts holes for easy installation
- Adopts wide voltage LM393 comparator
Product List:
1.Photosensitive resistance sensor module is very sensitive to light of environmental. It is generally used to detect the brightness of ambient light.
2.When the brightness of ambient light is lower than the set threshold value, the relay attracts to close and the common port and normal open port will be connected; while the brightness of the ambient light exceeds than the set threshold value, the relay breaks off and the common port and normal close port will be connected.
3.The common port, normal open and normal close port are equivalent to a double control switch. When there is electricity in the relay coil, the common port and normal open port are connected while there is no electricity in the relay coil, the common port and normal close port are connected.
Documents: