Load Cell - 150Kg

Load Cell - 150Kg

Load cells are designed to measure a specific force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires a load cell amplifier such as a HX711 load cell amplifier, or Sparkfun Openscale.

Each straight bar load cell is made from an aluminum-alloy and is capable of reading a capacity of 150KG and designed to measure force in one direction. They will often measure force in other directions, but the sensor sensitivity will be different, since parts of the load cell operating under compression are now in tension, and vice versa.

Specification:

• Combined error 0.02% F.S
• Sensitivity 1.0± 0.1mv/v
• Nonlinear 0.02% F.S
• Hysteresis 0.02% F.S
• Importance 0.02% F.S
• Creep 0.02% F.S/10min
• Zero output ±2%F.S
• Input impedance 405±10Ω
• Output impedance 350±3Ω
• Insulation resistance ≥5000MΩ (100VDC)
• Excitation voltage 5VDC~12VDC
• Temperature compensation range 10°C～+40°C
• Operating temperature range -20 ° C ~ +60 ° C
• Zero temperature effect 0.03%F.S/10°C
• Sensitivity temperature effect 0.02% F.S/10°C
• Safety overload range 120%
• Extreme overload range 150%
• Protection level IP65
• Method of connecting wire: Red(+),Black(-),Verde(+),White(-)
• Size：149 x 37.2 x 25mm
  
  

Connection: red wire to +E,black wire to -E,Verde wire to +S, White wire to -S

Tutorial:

• Getting Started with Load Cells
• Load Cell Amplifier HX711 Breakout Hookup Guide