9V to Barrel Jack Adapter V2

9V to Barrel Jack Adapter V2

9V to Barrel Jack Adapter V2

This is the second version of the 9V to Barrel Jack Adapter. In this version the material for the 9V battery jack is hard plastic, which makes it easier to connect and disconnect

Referência: PTR002833

1,11 €

Com IVA

Descrição

9V to Barrel Jack Adapter V2

This is the second version of the 9V to Barrel Jack Adapter. In this version the material for the 9V battery jack is hard plastic, which makes it easier to connect and disconnect

You can plug a 9V battery into one end and connect the other end to anything with a 5.5x2.1mm, center-positive barrel jack.

Use this cable to battery-power any device that needs 9V and has an on-board barrel jack - it works great for Arduinos, development boards, evaluation boards and more!

Detalhes do produtos

Clientes que compraram este produto também compraram:

Triple-Axis Digital-Output Gyro ITG-3200/3205 TiniSyne

Giroscópio

Triple-Axis Digital-Output Gyro ITG-3200/3205

Triple-Axis Digital-Output Gyro ITG-3200/3205 This is a breakout board for InvenSense's ITG-3205, a groundbreaking triple-axis, digital output gyroscope.

Buzzer 5V

Buzzers e Piezos

Buzzer 5V

Buzzer 5V This is a small 10mm round buzzer that operates around the audible 2kHz range.

Resistência 220R 5% 250mW

Resistencias 5% 250mW

Resistência 220R 5% 250mW

Resistência 220R 5% 250mW Resistencia 1/4W

Funduino Buzzer 5v Sounder Funduino

Buzzers e Piezos

Funduino Buzzer 5v Sounder

Funduino Buzzer 5v Sounder This is a small 12mm round buzzer that operates around the audible 2kHz range. You can drove it directly from 5V to generate the tones using a microcontroller like an Arduino. Use buzzers to create simple music or user interfaces.

Breadboard 400 Pontos Transparente Clear

Breadboard 400 Pontos Transparente Clear 2

Breadboards

Breadboard 400 Pontos Transparente Clear

Breadboard 400 Pontos Transparente ClearEver wonder what goes on inside these things? Well this clear bread board might enlighten.

HeatSink Kit for Raspberry Pi B+, 2 and 3 - 3pcs

Varios - Raspberry Pi

HeatSink Kit for Raspberry Pi B+, 2 and 3 - 3pcs

HeatSink Kit for Raspberry Pi B+, 2 and 3 - 3pcs

LDR - Light Controlled Resistor 1M 250mW - Norps-12

Sensores Ópticos

LDR - Light Controlled Resistor 1M 250mW - Norps-12

LDR - Light Controlled Resistor 1M 250mW - Norps-12 Light Dependent Resistor or Photoresistor, which is a passive electronic component, basically a resistor which has a resistance that varies depending of the light intensity.

Terminal Block 4P Black

Terminal Block 4P Black 2

Terminal Blocks

Terminal Block 4P Black

Terminal Block 4P Black Screw Terminals with 5mm pitch pins. They have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems).

Ponta cónica VTSS7 0.5mm

Não há produtos suficientes em stock

Material Soldadura

Ponta cónica VTSS7 0.5mm

Ponta cónica VTSS7 0.5mm

Ver

TSOP2238 - 38Khz IR Receiver

Sensores infravermelho

TSOP2238 - 38Khz IR Receiver

TSOP2238 - 38Khz IR Receiver Use this simple IR receiver for infrared remote control of your next project.

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies