PicoBoard | Varios

PicoBoard | Varios

PicoBoard | Varios

PicoBoard | Varios

PicoBoard | Varios

PicoBoard | Varios

PicoBoard | Varios

PicoBoard | Varios

PicoBoard | Varios

PicoBoard | Varios

PicoBoard | Varios

PicoBoard | Varios

PicoBoard | Varios

PicoBoard | Varios

PicoBoard

PicoBoard

The PicoBoard allows you to create interactions with various sensors using the Scratch programming language.

Referência: PTR002101

53,81 €

Com IVA

Descrição

PicoBoard

The PicoBoard allows you to create interactions with various sensors. Using the Scratch programming language, you can easily create simple interactive programs based on the input from sensors. The PicoBoard incorporates a light sensor, sound sensor, a button and a slider, as well as 4 additional inputs that can sense electrical resistance via included cables.

Designed for educators and beginners, the PicoBoard is a good way to get into the very basics of programming and reading sensors.

Note: 4 sets of alligator clips are included, however the miniUSB cable is not included. If you don't already have a miniUSB cable lying around make sure to pick one up. You can find the SparkFun miniUSB cable in the related products section below.

Note: The PicoBoard is a derivative work of the Scratch Sensor Board. More information can be found here and the design license can be found here.

Documents:

Detalhes do produtos

Clientes que compraram este produto também compraram:

Adafruit Small 1.2 8x8 LED Matrix w/I2C Backpack - Ultra Bright Branco | Matriz de Led

Adafruit Small 1.2 8x8 LED Matrix w/I2C Backpack - Ultra Bright Branco | Matriz de Led 2

Matriz de Led

Adafruit Small 1.2" 8x8 LED Matrix w/I2C Backpack - Ultra Bright Branco

Adafruit Small 1.2" 8x8 LED Matrix w/I2C Backpack - Ultra Bright White What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display.

JST RCY Plug with 10cm Leads - Female | Assemblados

JST RCY Plug with 10cm Leads - Female | Assemblados 2

Assemblados

JST RCY Plug with 10cm Leads - Female

JST RCY Plug with 10cm Leads - Female This female JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed.

SparkFun Benchtop Power Board Kit | Fonte de Alimentação

SparkFun Benchtop Power Board Kit | Fonte de Alimentação 2

Fonte de Alimentação

SparkFun Benchtop Power Board Kit

SparkFun Benchtop Power Board Kit You don’t have the power? Well, there’s no need to ask Scotty – the SparkFun Benchtop Power Board Kit has your back. This board will let you take advantage of your power supply to create a benchtop power supply with enough juice to run almost any of your embedded electronics projects.

MicroView - OLED Arduino Module | Arduino

MicroView - OLED Arduino Module | Arduino 2

Arduino

MicroView - OLED Arduino Module

MicroView - OLED Arduino Module The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display.

RFID 125KHZ KeyRing | RFID

RFID

RFID 125KHZ KeyRing

RFID 125KHZ KeyRing

Ver

JST RCY Plug with 10cm Leads - Male | Assemblados

JST RCY Plug with 10cm Leads - Male | Assemblados 2

Assemblados

JST RCY Plug with 10cm Leads - Male

JST RCY Plug with 10cm Leads - Male This female JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed.

RFID Button - 16mm (125kHz) | RFID

RFID Button - 16mm (125kHz) | RFID 2

RFID

RFID Button - 16mm (125kHz)

RFID Button - 16mm (125kHz)

3-Pin Female JST PH-Style Cable 30cm with Female Pins for 0.1 Housings | Assemblados

3-Pin Female JST PH-Style Cable 30cm with Female Pins for 0.1 Housings | Assemblados 2

Assemblados

3-Pin Female JST PH-Style Cable 30cm with Female Pins for 0.1" Housings

3-Pin Female JST PH-Style Cable 30cm with Female Pins for 0.1" Housings This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors.

Lithium Polymer USB Charger | Baterias Lipo

Lithium Polymer USB Charger | Baterias Lipo 2

Baterias Lipo

Lithium Polymer USB Charger

LiPo Charger Basic - Mini-USB If you need to charge LiPo batteries, this simple charger will do just that. It is designed to charge single-cell Li-Ion or Li-Polymer batteries.

Ver

Electronic Brick - Magnetic Sensor-Switch | Sensores Variados

Electronic Brick - Magnetic Sensor-Switch | Sensores Variados 2

Sensores Variados

Electronic Brick - Magnetic Sensor-Switch

Electronic Brick - Magnetic Sensor-Switch It is based on encapsulated dry reed switch CT10. CT10 is single-pole, single throw (SPST) type, having normally open ruthenium contacts.

Ver

Produto adicionado a lista de desejos

Ao continuares a navegar estás a consentir a utilização de cookies que possibilitam a apresentação de serviços e ofertas adaptadas aos teus interesses. Poderá consultar no seguinte link a nossa Politica de Cookies